Finding the best queen mattress for a Murphy bed in 2025 boils down to a few critical factors: weight, flexibility, and overall support. While many mattresses promise comfort, a Murphy bed demands a specific type of construction that can withstand vertical storage without sagging or deforming. Our top pick for 2025 is the Zinus Green Tea Memory Foam Mattress due to its excellent balance of medium-firm support, reasonable weight, and proven durability in vertical storage. This isn’t just about finding a comfortable place to sleep. it’s about optimizing your living space with a bed that seamlessly integrates into your daily life, transforming from a bedroom to a functional living area in moments. The right mattress ensures that convenience doesn’t come at the expense of a good night’s rest, or the longevity of your Murphy bed mechanism.

Here’s a comparison list of the top contenders for the best queen mattress for your Murphy bed in 2025:

Zinus Green Tea Memory Foam Mattress
- Key Features: Infused with green tea extract and ActivCharcoal to help absorb moisture and odors, medium-firm feel, responsive memory foam layers, comes compressed and rolled for easy setup.
- Average Price: $350-$500
- Pros: Excellent pressure relief, good for side and back sleepers, competitive price, relatively lightweight for memory foam, known for durability.
- Cons: Some off-gassing upon unboxing, might be too firm for strict stomach sleepers.
Linenspa 8 Inch Memory Foam and Innerspring Hybrid Mattress
- Key Features: Combines the contouring comfort of memory foam with the traditional support of an innerspring coil base, medium-firm feel, 8-inch profile, often touted as a budget-friendly hybrid.
- Average Price: $250-$400
- Pros: Cost-effective, good edge support from coils, hybrid design offers a balanced feel, lower profile ideal for many Murphy beds.
- Cons: Less pressure relief than pure memory foam, some users report feeling coils over time, not as durable as higher-end options.
Signature Design by Ashley Chime 12 Inch Memory Foam Mattress
- Key Features: 12-inch profile with multiple layers of memory foam, gel memory foam for cooling, high-density foam core for support, firm to medium-firm feel.
- Average Price: $450-$700
- Pros: Excellent motion isolation, good for back and stomach sleepers due to firmness, cooling properties, strong support.
- Cons: Heavier than some other options, 12-inch profile might be too thick for some Murphy bed mechanisms, initial off-gassing.
Novilla 10 Inch Gel Memory Foam Mattress
- Key Features: Four-layer all-foam design, gel-infused memory foam for temperature regulation, comfortable and supportive, medium-firm feel, breathable cover.
- Average Price: $300-$550
- Pros: Good for heat dissipation, provides consistent support, minimal motion transfer, good value.
- Cons: Can be slow to expand fully, some find it too soft for strict back support, not as widely recognized as other brands.
Olee Sleep 10 Inch Aquarius Memory Foam Mattress
- Key Features: High-density foam layers, includes gel-infused memory foam, provides a firm yet conforming feel, designed for pressure relief and spinal alignment.
- Average Price: $300-$500
- Pros: Excellent for back support, good for heavier individuals, very durable foam, reasonable price point.
- Cons: Might be too firm for side sleepers, minimal give, can feel hot for some.
LUCID 10 Inch Gel Memory Foam Mattress
- Key Features: Open-cell memory foam infused with gel for cooling, supportive base foam, medium-firm feel, designed to alleviate pressure points.
- Pros: Good airflow and temperature regulation, responsive feel, excellent for couples due to motion isolation, popular and well-reviewed.
- Cons: Some initial chemical odor, might be too soft for those who prefer very firm support.
Amazon Basics 10-Inch Memory Foam Mattress
- Key Features: Three-layer foam construction, medium-firm support, comes in a box, easy to set up, designed for everyday use.
- Average Price: $250-$450
- Pros: Extremely budget-friendly, simple and effective design, good for guest rooms or occasional use, lightweight.
- Cons: Less advanced features than other brands, may not offer as much long-term durability for daily use, some reports of being overly firm.

Table of Contents

Understanding Murphy Bed Mattress Requirements

When you’re talking about a Murphy bed, you’re not just looking for a mattress.

You’re looking for a bed component that needs to defy gravity for a good chunk of its life.

This isn’t your standard mattress purchase where you simply lie down and evaluate comfort.

There are engineering and practical considerations that become paramount.

Think of it like this: you’re selecting a critical piece of a complex mechanism.

The Importance of Mattress Weight

The weight of a mattress is perhaps the most underestimated factor when choosing one for a Murphy bed. It’s not just about how much you can lift. it’s about the very mechanics of the bed.

Mechanism Stress: Murphy beds rely on spring or piston mechanisms to assist with lifting and lowering the bed. These mechanisms are designed for a specific weight range. An excessively heavy mattress can overstress these components, leading to:
- Premature wear and tear on springs or pistons.
- Difficulty in lifting and lowering the bed, making it less convenient.
- Potential for the bed to fall too quickly or not stay securely upright.
- The manufacturer often provides a weight limit for the mattress, and adhering to this is crucial for warranty and safety.
Ease of Use: Imagine trying to lift a bed that feels like a lead weight every morning. A lighter mattress makes the operation smooth and effortless, encouraging consistent use of your Murphy bed. This is especially true for manual lift systems.
Safety: An overloaded mechanism is a safety hazard. If the counterbalance system fails, the bed could unexpectedly drop, posing a significant risk. Always prioritize a mattress within the manufacturer’s specified weight guidelines.

Ideal Mattress Thickness for Murphy Beds

Thickness might seem like a comfort preference, but for a Murphy bed, it’s a structural constraint.

Cabinet Dimensions: Murphy bed cabinets are built with precise internal dimensions to house the mattress. An overly thick mattress simply won’t fit, preventing the bed from closing properly.
Mechanism Clearance: Even if it fits inside the cabinet, the mattress needs clearance from the frame, folding legs, and any internal components when the bed is being closed or opened. Too thick, and it will bind, rub, or prevent smooth operation.
Aesthetic Integration: A mattress that’s too thick can also protrude awkwardly, disrupting the sleek, integrated look of a well-designed Murphy bed. Most Murphy beds are designed for mattresses between 8 to 12 inches thick. Some models might accommodate up to 14 inches, but it’s less common and should be confirmed with the bed manufacturer.

The Role of Flexibility and Durability

A mattress in a Murphy bed isn’t just lying flat.

It’s being rotated 90 degrees and stored vertically. This puts unique stresses on its construction.

Vertical Storage Stress:
- Sagging: Traditional innerspring mattresses, especially those with Bonnell coils, can sag or develop permanent indentations when stored vertically for extended periods. The coils are designed for horizontal compression, not vertical stress.
- Shifting Layers: Mattresses with loose or poorly adhered internal layers common in lower-quality hybrids or poorly constructed foam beds can experience shifting or bunching of materials over time, leading to lumps and uneven support.
- Edge Support: While good edge support is generally a positive, overly rigid edge support in a conventional mattress might not flex ideally within a Murphy bed frame during rotation.
Material Suitability:
- Memory Foam: Generally excellent. Its inherent flexibility allows it to conform without permanent deformation when stored vertically. High-density memory foam provides stable support.
- Latex: Similar to memory foam, latex is highly flexible and durable. It holds its shape well under vertical storage conditions and is naturally resilient.
- Pocketed Coils: Better than open coil systems, as each coil is individually wrapped, allowing for more independent movement and less chance of collective sagging. Still, less ideal than all-foam or all-latex for long-term vertical storage.
- Traditional Innerspring: Generally not recommended. The interconnected coils are prone to sagging, shifting, and losing their integrity when stored vertically. This can lead to a lumpy, uncomfortable sleep surface and a significantly shortened mattress lifespan.

Top Mattress Types for Murphy Beds

When it comes to Murphy beds, not all mattress types are created equal. Contabo Vps Pricing (2025)

The unique demands of vertical storage and the mechanical constraints of the bed unit narrow down the best options significantly.

You’re looking for materials that can handle being on their side for extended periods without degrading their performance or structural integrity.

Memory Foam Mattresses

Memory foam is often considered the gold standard for Murphy beds, and for good reason. Its viscoelastic properties make it uniquely suited to this application.

Why they excel for Murphy Beds:
- Conformity and Pressure Relief: Memory foam excels at contouring to your body, providing excellent pressure relief and spinal alignment. This is crucial for a comfortable night’s sleep, especially after a day of being stored vertically.
- Motion Isolation: If two people are sleeping on the bed, memory foam’s ability to absorb movement means one person’s tossing and turning won’t disturb the other. This is a huge benefit for couples.
- Durability in Vertical Storage: Unlike traditional innerspring mattresses, memory foam doesn’t rely on springs that can sag or deform when stored upright. Its dense, uniform structure maintains its shape well. The internal cells distribute weight evenly, so gravity doesn’t cause localized sagging when the mattress is vertical.
- Weight: While some high-density memory foam mattresses can be heavy, many modern options, especially those around 8-10 inches, are designed to be manageable within typical Murphy bed weight limits. For instance, a 10-inch queen memory foam mattress often weighs between 70-90 lbs, which is well within the acceptable range for most Murphy bed mechanisms.
- Quiet Operation: Being all-foam, there are no springs to creak or squeak, contributing to a silent and peaceful sleep environment.
Considerations:
- Off-gassing: New memory foam mattresses can have a slight “new mattress smell” or off-gassing for the first few days. This is usually harmless and dissipates quickly, especially with good ventilation.
- Heat Retention: Older or less advanced memory foams could sometimes sleep hot. However, modern memory foam mattresses, like the Zinus Green Tea Memory Foam Mattress or LUCID 10 Inch Gel Memory Foam Mattress, often incorporate cooling technologies like gel infusions, open-cell structures, or breathable covers to mitigate this.
- Firmness Variation: Memory foam comes in various firmness levels. For a Murphy bed, a medium-firm to firm option is often preferred for balanced support and to prevent excessive sinkage when sleeping.

Latex Mattresses

Latex mattresses are another excellent choice for Murphy beds, offering a unique blend of responsiveness, durability, and natural properties.

*   Durability and Resilience: Latex is incredibly durable and resilient. It quickly returns to its original shape, making it highly resistant to permanent indentations or sagging, even with vertical storage. This is a significant advantage for longevity.
*   Responsiveness: Unlike traditional memory foam which can have a "sinking in" feeling, latex offers a more "on top of the bed" feel. It's bouncier and more responsive, making it easier to change sleeping positions.
*   Breathability: Natural latex inherently has an open-cell structure that promotes airflow, making it generally cooler than traditional memory foam.
*   Hypoallergenic: Natural latex is resistant to dust mites, mold, and mildew, making it a good choice for allergy sufferers.
*   Weight: Similar to memory foam, latex mattresses can be substantial. However, they are generally manageable within Murphy bed weight limits, especially those around 8-10 inches.
*   Price: Latex mattresses, especially those made from natural latex, tend to be more expensive than memory foam or hybrid options. This is due to the natural material sourcing and manufacturing process.
*   Weight: While durable, latex can be denser and heavier than some memory foam options, so always check the specific mattress weight against your Murphy bed's limits.
*   Firmness: Latex offers a variety of firmness levels, from soft to very firm. Ensure you choose a firmness that aligns with your comfort preferences and provides adequate support.

Hybrid Mattresses with caveats

Hybrid mattresses combine layers of foam memory foam, latex, or polyfoam with an innerspring coil support system.

While offering the best of both worlds in many scenarios, they come with significant caveats for Murphy bed applications.

Why they might be considered with caution:
- Balanced Feel: Hybrids can offer the contouring comfort of foam with the supportive bounce and airflow of coils.
- Edge Support: Many hybrids feature reinforced edge support from their coil systems, which can be beneficial for getting in and out of bed.
- Airflow: The coil layer allows for more airflow than all-foam mattresses, which can help with temperature regulation.
Major Considerations and why they are often NOT ideal:
- Weight: This is the biggest hurdle. The addition of a coil unit significantly increases the overall weight of the mattress. A queen hybrid can easily weigh 100-150+ lbs, potentially exceeding the weight capacity of many Murphy bed mechanisms. Exceeding this limit compromises safety and functionality.
- Coil Type and Durability in Vertical Storage:
  - Pocketed Coils: If you must choose a hybrid, look for one with individually pocketed coils. These coils move independently, which makes them less prone to collectively sagging or deforming when stored vertically compared to interconnected coil systems. However, even pocketed coils are designed for horizontal compression.
  - Open Coils/Bonnell Coils: These are an absolute no-go for Murphy beds. They are highly susceptible to permanent deformation, sagging, and structural integrity issues when stored upright. The mattress will develop lumps and lose support very quickly.
- Thickness: Hybrids are often thicker due to the combination of foam and coils 10-14+ inches. This can pose fitting issues within the Murphy bed cabinet.
- Flexibility: While some hybrids are designed to be rolled for shipping, their inherent structure is less flexible than all-foam or all-latex, which might put stress on the mattress or bed mechanism during the lifting/lowering process.

In summary, while memory foam and latex mattresses are generally the safest and most recommended choices for Murphy beds due to their flexibility, durability in vertical storage, and manageable weight, hybrid mattresses should be approached with extreme caution, prioritizing those with pocketed coils and ensuring the overall weight and thickness align with your Murphy bed’s specifications. Traditional innerspring mattresses are almost universally unsuitable for this application.

Factors to Consider When Choosing a Queen Mattress for a Murphy Bed

Beyond just the mattress type, several other critical factors play a role in selecting the perfect queen mattress for your Murphy bed.

Neglecting these could lead to discomfort, damage to your bed, or even safety issues. Top 50 Mattress Brands (2025)

Firmness Level

The firmness of a mattress isn’t just about personal preference.

It impacts support, pressure relief, and how well the mattress performs when stored vertically.

Medium-Firm to Firm is Generally Best: For most Murphy bed users, a medium-firm to firm mattress offers the ideal balance.
- Support: It provides robust support for spinal alignment, crucial for preventing back pain, especially for back and stomach sleepers.
- Durability: Firmer foams tend to be denser, which means they are less likely to compress permanently or sag when stored vertically for long periods. They retain their shape better over time.
- Versatility: A medium-firm mattress often suits a wider range of sleeping positions and body types, making it a good choice for guest rooms where various sleepers might use the bed.
Avoiding Too Soft:
- Lack of Support: An overly soft mattress can lead to excessive sinkage, misaligning the spine and causing discomfort, particularly for back and stomach sleepers.
- Vertical Sagging: Softer foams, especially lower-density ones, are more susceptible to permanent impressions or “body dents” when stored vertically, as gravity can cause the softer materials to pool or compress at the bottom of the stored bed.
- Difficulty Moving: While soft for comfort, a very soft mattress can make it harder to move around or get out of bed, as you sink deeper into the material.

Off-Gassing and Material Safety

When you unbox a new mattress, especially one that comes compressed in a box, you might notice a distinct smell. This is known as “off-gassing.”

What is Off-Gassing? It’s the release of volatile organic compounds VOCs that are byproducts of the foam manufacturing process. While generally considered harmless in the small quantities released, it can be unpleasant.
Ventilation is Key: Always allow a new mattress to off-gas in a well-ventilated room for at least 24-72 hours before using it, especially in a confined space like a Murphy bed cabinet. Opening windows and using a fan can accelerate the process.
Certifications for Peace of Mind: For greater assurance about material safety and low VOC emissions, look for mattresses with specific certifications:
- CertiPUR-US®: This is the most common certification for foam mattresses in the US. It ensures that the foam is made without ozone depleters, PBDEs, TDCPP, or TCEP flame retardants, mercury, lead, heavy metals, formaldehyde, or phthalates. It also certifies low VOC emissions for indoor air quality.
- OEKO-TEX® Standard 100: This certification tests for harmful substances in textiles at all stages of production. While more common for mattress covers, it indicates a commitment to chemical safety.
- GREENGUARD Gold: This certification signifies that a product has met rigorous chemical emissions standards, contributing to healthier indoor air quality.
Natural Materials: If you’re particularly sensitive or prefer natural products, consider mattresses made with natural latex or those with organic certifications like GOTS for organic cotton or GOLS for organic latex. These generally have minimal to no off-gassing.

Edge Support

Edge support refers to the sturdiness of the mattress perimeter.

While important for any mattress, its role in a Murphy bed is slightly nuanced.

Getting In and Out: Good edge support prevents you from feeling like you’re rolling off the side of the bed when sitting or sleeping near the edge. This is especially helpful for those with mobility issues or when sharing the bed.
Maximizing Sleepable Surface: Strong edges ensure that the entire surface of the mattress is usable, rather than just the center. For a queen size, this means both sleepers get ample space without feeling like they’re falling off.
Durability less critical for vertical storage: While traditional thinking suggests strong edges are good for preventing sagging when sitting, for a Murphy bed stored vertically, the primary stress is on the overall core of the mattress, not just its edges. An overly rigid edge that doesn’t integrate well with the core can sometimes create stress points in foam mattresses when flexing.
Best for Murphy Beds: Memory foam and latex mattresses inherently have consistent support across their entire surface, including the edges, due to their uniform density. Hybrid mattresses with reinforced perimeter coils can also offer excellent edge support, but again, remember the weight and vertical storage considerations for hybrids.

Cooling Properties Especially for Memory Foam

One of the common complaints about traditional memory foam is its tendency to retain heat.

For a comfortable night’s sleep, especially if you’re a warm sleeper, cooling features are essential.

Gel Infusions: Many modern memory foam mattresses, like the Novilla 10 Inch Gel Memory Foam Mattress or LUCID 10 Inch Gel Memory Foam Mattress, incorporate gel particles into the foam. Gel is designed to absorb and dissipate heat, helping to regulate temperature.
Open-Cell Structure: This refers to a less dense, more breathable foam structure with tiny air pockets that allow heat to escape more easily. Look for “open-cell memory foam.”
Copper or Graphite Infusions: These materials are highly conductive and can draw heat away from the body, leading to a cooler sleep surface.
Breathable Covers: Mattress covers made from materials like Tencel, cotton, or bamboo are often more breathable and moisture-wicking than synthetic fabrics, helping to keep you cool and dry.
Airflow Channels: Some mattress designs incorporate specific cuts or channels within the foam layers to promote air circulation.

Considering these factors thoroughly will ensure you select a queen mattress that not only provides excellent sleep comfort but also integrates seamlessly and safely with your Murphy bed system for years to come.

Measuring Your Murphy Bed for the Perfect Fit

This step is absolutely non-negotiable. Best Ringworm Cream (2025)

Trying to eyeball it or relying on standard mattress sizes can lead to a costly mistake.

Murphy beds are built with specific tolerances, and a mattress that’s even slightly off can prevent the unit from functioning correctly. Think of it like a custom-fitted suit.

Standard sizes are a starting point, but the true fit comes from precise measurements.

Why Precise Measurements are Crucial

Functional Clearance: Murphy beds require very specific clearance around the mattress to operate smoothly. The mattress needs to move freely within the cabinet without rubbing against the frame, the bed’s lifting mechanism, or the cabinet doors. Even an extra half-inch of thickness or width can cause binding, scuffing, or prevent the bed from closing fully.
Safety and Mechanism Load: As discussed, the bed’s mechanism is calibrated for a certain mattress thickness and weight. An overly thick mattress can put undue stress on these components, potentially leading to failure, difficulty lifting, or even a safety hazard.
Aesthetic Integration: A mattress that fits snugly and correctly ensures the Murphy bed looks like a cohesive, integrated piece of furniture when closed, not like a forced fit.

How to Measure Your Murphy Bed Frame

Don’t measure your old mattress.

Mattresses compress over time and may not be the exact size specified.

Always measure the internal dimensions of the Murphy bed frame itself.

Measure Internal Length:
- Method: Use a retractable metal tape measure. Measure from the inside of the headboard end of the bed frame to the inside of the footboard end of the frame.
- Pro Tip: Measure in at least three places left side, middle, right side to account for any slight manufacturing variations or warping over time. Take the smallest measurement.
- Standard Queen Length: A standard queen mattress is 80 inches long. Your measurement should be very close to this, or slightly more, to allow for some breathing room.
Measure Internal Width:
- Method: Measure from the inside of one side rail to the inside of the opposite side rail.
- Pro Tip: Again, measure in at least three places head, middle, foot and take the smallest measurement.
- Standard Queen Width: A standard queen mattress is 60 inches wide. Your measurement should be close to this.
Measure Internal Depth Height/Thickness:
- Method: This is the most critical measurement for Murphy beds. Measure from the bed platform where the mattress rests straight up to the inside of the closed cabinet door or the highest point of the bed mechanism that would restrict mattress height. You are measuring the maximum allowable mattress thickness.
- Pro Tip: Close the bed mechanism partially if possible to visualize where the mattress will sit and what components might be in its way. You might need to use a straight edge or a carpenter’s square to ensure your vertical measurement is accurate and not skewed by angled parts.
- Typical Range: Most Murphy beds accommodate mattresses between 8 to 12 inches thick. Some newer, larger units might go up to 14 inches, but it’s rare. If your measurement indicates a very shallow depth e.g., less than 8 inches, you might need a specialized low-profile mattress.
Check for Obstructions:
- Folding Legs: Pay close attention to the folding legs or supports that retract into the bed frame. Ensure that your chosen mattress thickness will allow these to fold completely without obstruction.
- Mechanism Arms: Inspect the arms or pistons of the lifting mechanism. Does the mattress need to fit between these, or will it sit below them? Account for any components that protrude into the mattress space.
- Strap Placement: Note where the mattress retaining straps if your Murphy bed has them are located. The mattress shouldn’t be so thick that these straps struggle to buckle or put undue pressure on the mattress or frame.

Always consult your Murphy bed’s owner’s manual or the manufacturer’s specifications. This document will often provide precise maximum mattress dimensions length, width, and especially thickness and weight limits. This information is your absolute best source. When in doubt, err on the side of a slightly thinner and lighter mattress. It’s better to have a little extra room than to buy a mattress that simply won’t fit or causes strain on your valuable Murphy bed system.

Popular Queen Mattress Brands & Models for Murphy Beds 2025

Navigating the vast mattress market can be overwhelming, but for Murphy beds, we’re looking for specific characteristics: dependable construction, moderate weight, and suitability for vertical storage.

Here are some of the most popular and well-regarded queen mattress brands and models that typically fit the bill for Murphy beds in 2025, with a focus on why they work and what to look for.

Zinus Green Tea Memory Foam Mattress

Why it’s great for Murphy Beds: This is a consistently strong contender due to its excellent value, balanced medium-firm feel, and reliable performance when stored vertically. Zinus specializes in compressed, bed-in-a-box mattresses, which are inherently designed to handle being manipulated like rolling and unrolling, suggesting their foam structure is robust. The green tea infusion helps with freshness, a nice bonus for a bed that might be enclosed.
Key Features for Murphy Beds:
- Density and Support: The memory foam layers are dense enough to offer good support without being excessively heavy. The firm base layer provides stability.
- Thickness Options: Available in multiple thicknesses 8, 10, 12 inches, allowing you to choose the perfect fit for your Murphy bed’s depth limit. The 10-inch version is often ideal.
- Weight: A queen 10-inch Zinus Green Tea mattress typically weighs around 70-80 lbs, which is well within the capacity of most Murphy bed mechanisms.
Considerations: Some users report initial off-gassing, but it usually dissipates quickly. Its medium-firmness is great for most, but those desiring a very plush feel might find it a bit firm.

Linenspa 8 Inch Memory Foam and Innerspring Hybrid Mattress

Why it’s great for Murphy Beds: For those on a tighter budget or who prefer a slightly bouncier feel than pure memory foam, the Linenspa 8-inch hybrid is a compelling option. Its 8-inch profile is particularly attractive for older or shallower Murphy bed cabinets.
- Low Profile: The 8-inch thickness is perfect for Murphy beds with stricter depth limitations.
- Hybrid Design: Combines a thin layer of memory foam for comfort with traditional innerspring coils for support. This offers a balance of contouring and bounce.
- Weight: Due to its 8-inch profile, it’s generally lighter than thicker hybrids, often weighing around 60-70 lbs for a queen, making it manageable for Murphy bed mechanisms.
Considerations: Being an 8-inch mattress, it offers less foam comfort layer than thicker options. The innerspring coils, while offering support, might be more prone to showing signs of vertical storage though less so than open coils compared to all-foam or latex mattresses if stored for extremely long, uninterrupted periods. It’s best for occasional use or for those who don’t mind a firmer, more traditional feel.

Signature Design by Ashley Chime 12 Inch Memory Foam Mattress

Why it’s great for Murphy Beds: Ashley Furniture is a household name, and their Chime series offers a reliable memory foam option. The 12-inch version is popular for those whose Murphy beds can accommodate the extra thickness, providing a more luxurious feel.
- Comfort Layers: The 12-inch profile allows for more substantial comfort layers, including gel memory foam, which enhances pressure relief and can help with cooling.
- Solid Support Core: Features a high-density foam core that provides robust support, essential for durability and maintaining shape in vertical storage.
- Motion Isolation: Excellent at absorbing motion, making it ideal for couples.
Considerations: At 12 inches thick, it’s crucial to double-check your Murphy bed’s depth capacity. It will also be heavier than the 8 or 10-inch options a queen can be 80-100+ lbs, so confirm your bed’s weight limit. Initial off-gassing might be present.

Novilla 10 Inch Gel Memory Foam Mattress

Why it’s great for Murphy Beds: Novilla offers a good value proposition with its all-foam design focused on comfort and cooling. The 10-inch profile is a sweet spot for many Murphy bed owners.
- Gel Infusion: Designed to keep sleepers cool, a common concern with memory foam.
- Multi-Layer Construction: Typically features a comfort layer, a transitional layer, and a high-density base foam for balanced support and pressure relief.
- Medium-Firm Feel: Generally provides a comfortable medium-firm feel that suits most sleepers.
Considerations: As a newer brand, long-term durability data might be less extensive than for more established names. Some users report a slight delay in full expansion after unboxing.

Olee Sleep 10 Inch Aquarius Memory Foam Mattress

Why it’s great for Murphy Beds: Olee Sleep is known for offering firm and supportive foam mattresses at a competitive price, making the Aquarius an excellent option for those prioritizing robust support in their Murphy bed.
- Firm Support: If you prefer a firmer feel, this mattress delivers. Its high-density foam layers provide excellent spinal alignment.
- Gel Infusion: Includes gel for temperature regulation.
- Durability: The dense foam construction is resistant to sagging and holds its shape well, which is beneficial for vertical storage.
Considerations: May be too firm for side sleepers or those who prefer a more plush feel. Initial off-gassing is possible.

LUCID 10 Inch Gel Memory Foam Mattress

Why it’s great for Murphy Beds: LUCID is a popular brand in the bed-in-a-box segment, offering reliably comfortable and supportive memory foam options, with the 10-inch gel memory foam being a standout for Murphy beds.
- Open-Cell Gel Memory Foam: Designed for better airflow and temperature regulation, combating the heat retention issue.
- Pressure Relief: Contours well to the body, alleviating pressure points.
- Consistent Support: The high-density base foam ensures consistent support across the entire mattress.
Considerations: Some users have reported a distinct smell upon unboxing that requires ventilation. While good for cooling, it’s not as cool as some specialized cooling mattresses.

Amazon Basics 10-Inch Memory Foam Mattress

Why it’s great for Murphy Beds: When budget is paramount and you need a no-frills, reliable memory foam mattress for occasional use, the Amazon Basics option is hard to beat.
- Affordability: One of the most budget-friendly queen memory foam mattresses available.
- Simple Design: A straightforward three-layer foam construction that offers basic comfort and support.
- Lightweight: Typically on the lighter side for a 10-inch queen, making it easy to manage within a Murphy bed.
Considerations: Lacks advanced features like gel infusions or specialized cooling. While adequate for occasional use, it might not offer the same level of long-term durability or premium comfort for daily sleepers compared to higher-tier options. Expect basic performance.

When making your final decision, cross-reference your Murphy bed’s specifications max thickness, max weight with the actual product specifications of the mattress you’re considering.

Best Dust Mite Mattress Protector (2025)

User reviews specifically mentioning Murphy bed use can also be a valuable resource for real-world performance insights.

Installation and Maintenance Tips for Your Murphy Bed Mattress

Getting the right mattress is only half the battle.

Proper installation and ongoing maintenance are crucial to ensure your Murphy bed and mattress provide years of comfortable, trouble-free service.

Neglecting these steps can lead to premature wear, reduced comfort, or even safety issues.

Mattress Installation Checklist

Unboxing and positioning a queen-size mattress can be a workout, especially if it’s a bed-in-a-box. Follow these steps for a smooth setup:

Two-Person Job: Queen mattresses, even lighter foam ones, are bulky and can be awkward. Enlist a helper to safely maneuver the mattress into place.
Unboxing in Place: If your mattress comes compressed in a box, it’s often easiest to carefully remove it from the box near the Murphy bed. Unroll it onto the bed platform before cutting open the final plastic wrapping. This allows it to expand in its designated spot, minimizing heavy lifting.
Allow for Full Expansion: Memory foam and hybrid mattresses need time to fully expand after being unboxed.
- Timeframe: This can range from 24 to 72 hours, sometimes longer depending on temperature and humidity. Do not close the Murphy bed or sleep on the mattress during this expansion period.
- Ventilation: Ensure the room is well-ventilated during expansion to dissipate any off-gassing.
- Check for Full Size: Once fully expanded, confirm it meets the advertised dimensions and your Murphy bed’s requirements.
Secure with Straps if applicable: Most Murphy beds come with straps or elastic bands to hold the mattress securely to the frame when the bed is in the upright position.
- Purpose: These straps prevent the mattress from shifting or falling out when the bed is closed. They also ensure the mattress remains properly aligned for smooth operation.
- Proper Placement: Ensure the straps are taut but not overly tight, which could compress the mattress unevenly. They should hold the mattress firmly against the bed platform.
Test the Mechanism: Once the mattress is in place and secured, slowly and carefully lift and lower the Murphy bed several times.
- Smooth Operation: Listen for any rubbing, creaking, or unusual sounds. The operation should be smooth and effortless.
- Clearance: Check for any binding or points where the mattress rubs against the cabinet or mechanism. If there’s rubbing, re-check your mattress measurements against the Murphy bed’s maximum capacity.
- Balanced Lift: The bed should lift with assistance from the mechanism and stay securely in the upright position. If it feels too heavy or drops too quickly, the mattress might exceed the weight limit, or the springs/pistons may need adjustment consult your Murphy bed manual or a professional.

Regular Maintenance for Longevity

A little ongoing care goes a long way in preserving both your mattress and your Murphy bed.

Rotate the Mattress Regularly: Even with modern foams, rotating the mattress every 3-6 months can help distribute wear evenly and prolong its lifespan. For a Murphy bed, this means rotating it 180 degrees head to foot. You generally don’t need to flip an all-foam or most hybrid mattresses.
Air Out the Mattress: Since Murphy beds are often enclosed, regular airing is beneficial.
- Frequency: At least once a week, or whenever you use the bed, leave it down for a few hours with any bedding pulled back.
- Benefits: This allows moisture to evaporate, reduces the buildup of odors, and keeps the mattress feeling fresh. It’s particularly important for guest beds that might be closed for extended periods.
Clean Appropriately:
- Spot Cleaning: Address spills immediately with a mild detergent and water, blotting gently. Avoid saturating the mattress.
- Protective Cover: Invest in a good quality, breathable, waterproof mattress protector. This is your first line of defense against spills, dust mites, allergens, and general wear and tear, significantly extending the life of your mattress.
- Vacuuming: Periodically vacuum the mattress surface using an upholstery attachment to remove dust and debris.
Inspect Bed Mechanism: Periodically check the Murphy bed’s lifting mechanism, screws, and hinges.
- Tighten Fasteners: Over time, screws can loosen. Gently tighten any loose screws or bolts on the bed frame and mechanism.
- Lubrication: If the manual recommends it, lubricate any moving parts of the mechanism.
- Professional Check: If you notice significant changes in how the bed lifts or lowers, or if you hear persistent grinding/squeaking, consult the Murphy bed manufacturer’s troubleshooting guide or consider professional inspection. Don’t force a stuck or difficult mechanism.
Avoid Excessive Weight: Remind users and guests not to jump on the bed or place excessively heavy objects on it, as this can damage both the mattress and the Murphy bed mechanism.

By following these installation and maintenance tips, you’ll maximize the comfort, lifespan, and safety of your queen mattress in your Murphy bed setup.

It’s an investment in space-saving convenience, and treating it right ensures you get the full return on that investment.

Murphy Bed Mattress FAQs

Is a memory foam mattress good for a Murphy bed?

Yes, memory foam mattresses are generally considered one of the best types for Murphy beds. Clickfunnels Cheaper Alternative (2025)

Their flexibility allows them to be stored vertically without permanent deformation or sagging, and their consistent density helps maintain shape.

What is the ideal thickness for a Murphy bed mattress?

The ideal thickness for a Murphy bed mattress typically ranges from 8 to 12 inches. It’s crucial to measure your specific Murphy bed cabinet’s internal depth, as exceeding this limit will prevent the bed from closing properly.

What is the maximum weight a Murphy bed mattress can be?

The maximum mattress weight for a Murphy bed varies significantly by manufacturer and mechanism type. Most queen Murphy beds can support a mattress weighing between 70 to 100 lbs. Always check your Murphy bed’s specific owner’s manual for its exact weight capacity.

Can I use a regular spring mattress in a Murphy bed?

No, it is generally not recommended to use a regular spring mattress in a Murphy bed. Traditional innerspring mattresses are prone to sagging, shifting coils, and losing their integrity when stored vertically for extended periods, leading to discomfort and damage.

Do Murphy beds come with mattresses?

No, most Murphy beds are sold as frames or cabinet units only, and do not include a mattress. You typically need to purchase the mattress separately, which allows you to choose one that perfectly suits your comfort preferences and the Murphy bed’s specifications.

How do I choose the right firmness for a Murphy bed mattress?

For a Murphy bed, a medium-firm to firm mattress is generally recommended. This level of firmness provides good support, maintains its shape better during vertical storage, and is comfortable for most sleeping positions.

Will a thick mattress fit in a Murphy bed?

A thick mattress might not fit in a Murphy bed. Murphy beds have specific internal depth limitations, usually 8-12 inches. A mattress thicker than your unit’s maximum capacity will prevent the bed from closing or cause rubbing/binding.

How do I know if my Murphy bed can support a heavy mattress?

Refer to your Murphy bed’s owner’s manual or the manufacturer’s website.

They will specify the maximum allowable mattress weight.

Exceeding this weight can damage the lifting mechanism and compromise safety. Best Antifungal Cream For Ringworm (2025)

Do I need special sheets for a Murphy bed mattress?

No, you typically do not need special sheets for a Murphy bed mattress. Standard queen-size sheets will fit a queen Murphy bed mattress. However, deep-pocket sheets may be beneficial if your mattress is on the thicker side 10-12 inches to ensure a secure fit.

How often should I replace my Murphy bed mattress?

The lifespan of a Murphy bed mattress is similar to a regular mattress, typically 7-10 years, depending on the material quality, how often it’s used, and proper maintenance. Regular rotation and airing can extend its life.

Can I use a box spring with a Murphy bed mattress?

No, you cannot use a box spring with a Murphy bed. Murphy beds are designed to support the mattress directly on a slat system or solid platform. Adding a box spring would make the bed too thick and heavy to fit and operate.

What happens if my mattress is too heavy for my Murphy bed?

If your mattress is too heavy, the Murphy bed’s lifting mechanism will be overstressed. This can lead to:

Difficulty lifting and lowering the bed.
Rapid or uncontrolled descent of the bed.
Premature wear and tear or failure of springs/pistons.
Potential safety hazards.

How do I prevent my Murphy bed mattress from sagging?

Choose a high-quality foam memory foam or latex mattress with good density. Rotate the mattress every 3-6 months.

Ensure the Murphy bed’s platform or slats provide adequate, even support. Avoid excessive weight on the bed.

Is off-gassing from a new mattress a concern for Murphy beds?

Yes, off-gassing can be a concern, especially since Murphy beds are often enclosed. Always allow a new memory foam mattress to off-gas in a well-ventilated room for at least 24-72 hours before placing it in the Murphy bed cabinet and closing it.

Do I need to secure the mattress in a Murphy bed?

Yes, it is crucial to secure the mattress.

Most Murphy beds include straps or elastic bands to hold the mattress firmly against the bed platform when it’s stored vertically. This prevents it from shifting or falling out.

Can I use an adjustable base with a Murphy bed?

No, you cannot use an adjustable base with a Murphy bed. Murphy beds are designed for a flat, non-articulating mattress and a rigid bed platform. An adjustable base is a separate, motorized unit that will not fit within the Murphy bed’s frame. Antifungal Cream For Ringworm (2025)

Are pocketed coil hybrids good for Murphy beds?

Pocketed coil hybrids are better than traditional innerspring mattresses for Murphy beds, but they are still less ideal than all-foam or all-latex. Their primary drawbacks are often increased weight and thickness, which can exceed Murphy bed limits. Always confirm weight and thickness.

What’s the best type of foam for a Murphy bed mattress?

High-density memory foam or natural latex foam are generally considered the best.

They offer excellent durability, conformability, and hold their shape well when stored vertically.

How do I clean a Murphy bed mattress?

Spot clean spills immediately with a mild detergent and water, blotting gently. Do not saturate.

Use an upholstery attachment to vacuum the mattress periodically.

A waterproof mattress protector is highly recommended for easy cleaning and protection.

Should I choose a firm or soft mattress for my Murphy bed?

A medium-firm to firm mattress is typically recommended. It provides better support, especially for daily use, and maintains its structural integrity more effectively when stored upright compared to very soft options.

What are the benefits of a gel-infused memory foam mattress for a Murphy bed?

Gel-infused memory foam helps dissipate heat, addressing the common concern of memory foam sleeping hot.

This can be particularly beneficial for a mattress that is often enclosed in a Murphy bed cabinet.

Can a Murphy bed mattress be rolled or folded?

Most memory foam and some hybrid mattresses are compressed and rolled for shipping bed-in-a-box. Once expanded, they should not be re-rolled or folded for storage, as this can damage their internal structure. They are designed to be stored vertically. Starkey Edge Cic (2025)

What if my Murphy bed mechanism feels too stiff or loose?

If the mechanism feels too stiff hard to lift or too loose drops too quickly, it might indicate an issue with the counterbalance system springs or pistons. Consult your Murphy bed’s manual for adjustment instructions or contact the manufacturer for professional assistance. Do not attempt to force it.

Can I put a mattress topper on my Murphy bed mattress?

Yes, you can generally use a mattress topper on your Murphy bed mattress. However, be mindful of the additional thickness it adds. Ensure that the combined thickness of the mattress and topper still allows the Murphy bed to close properly without binding.

What is the average lifespan of a Murphy bed?

A well-maintained Murphy bed mechanism can last 15-20 years or more, depending on the quality of construction and frequency of use. The mattress, however, typically needs replacement every 7-10 years.

Are there any mattresses specifically designed for Murphy beds?

While there aren’t many mattresses exclusively marketed for Murphy beds, many bed-in-a-box memory foam and latex mattresses are inherently well-suited due to their consistent density, flexibility, and manageable weight. Look for CertiPUR-US® certified foams.

How does humidity affect a Murphy bed mattress?

High humidity can encourage mold and mildew growth in enclosed spaces.

Regularly airing out your Murphy bed mattress and using a breathable mattress protector are key to mitigating humidity effects, especially if you live in a humid climate or the bed is stored in a less ventilated area.

Can I store bedding with the mattress in a Murphy bed?

Many Murphy beds allow you to store thin bedding sheets, a thin blanket with the mattress when closed, especially if the mattress is on the thinner side.

However, thick duvets or pillows usually need to be removed before closing the bed, as they add too much bulk.

What are the dangers of an incompatible mattress in a Murphy bed?

Using an incompatible mattress too thick, too heavy, or wrong type like traditional innerspring can lead to:

Damage to the Murphy bed mechanism.
Difficulty or inability to close the bed.
Sagging, uncomfortable mattress over time.
Compromised safety, including the bed potentially falling unexpectedly.

How much do queen mattresses for Murphy beds typically cost?

Queen mattresses suitable for Murphy beds typically range from $250 to $700, depending on the type memory foam, latex, brand, thickness, and features. Memory foam options tend to be more budget-friendly, while latex can be at the higher end. Contabo Vps Review (2025)

Best Queen Mattress For Murphy Bed (2025)