To get your Rexing V1P Flex X4 up and running, first, you’ll need to mount the main camera on your windshield, ideally behind your rearview mirror for an unobstructed view, using the electrostatic sticker and adhesive mount, then insert and format a high-endurance Micro SD card Class 10/UHS-1 or higher, up to 512GB right there in the camera, and finally, plug in the power cable to your car’s 12V outlet or, for 24/7 surveillance, install the Rexing Smart Hardwire Kit by connecting its wires to constant and ignition-switched fuses and a ground in your vehicle’s fuse box.

Getting a dash cam like the Rexing V1P Flex X4 installed in your car is a fantastic step towards peace of mind on the road. We’ve all seen those crazy moments caught on camera online, and having your own dash cam means you’re prepared for anything, whether it’s an unexpected accident or just wanting to document a scenic drive. The V1P Flex X4, with its 4K front camera, optional additional cameras rear, left, right, and Wi-Fi connectivity, is a pretty robust system, giving you comprehensive coverage that’s super helpful for insurance claims, protecting against road rage incidents, or even just capturing those “did you just see that?!” moments. Setting it up might seem a bit daunting at first, especially with all the cables and options, but trust me, it’s totally doable, and by the time we’re done here, you’ll have yours installed neatly and working perfectly. It’s really about taking it one step at a time, and the payoff for having that extra layer of security is absolutely worth it.

When you first unbox your Rexing V1P Flex X4, you’ll find a few key components. Knowing what each piece does will make the installation much smoother. You’ll typically get:

• The Main Front Camera Unit: This is the brains of the operation, often boasting that crisp 4K recording.
• Adhesive Mount & Electrostatic Sticker: These are for securely attaching the camera to your windshield. The electrostatic sticker acts as a buffer, making it easier to remove the mount later without leaving residue.
• Car Power Cable Cigarette Lighter Adapter: This plugs into your car’s 12V accessory socket for standard power.
• Rear Camera and Extension Cable: If you opted for the dual-channel version, you’ll have this for recording what’s happening behind you. The Flex X4 can even support additional left/right cameras, which are often sold separately.
• USB Data Cable: For connecting to a computer though Wi-Fi is often more convenient for file transfer.
• User Manual: Always a good idea to glance through this for model-specific details.
• Cable Management Tools/Clips: Sometimes included to help you tuck away those wires for a cleaner look.

The Essentials: Pre-Installation Checklist

Before you even think about sticking anything to your windshield, let’s get a few things ready. A little prep goes a long way here:

• High-Endurance Micro SD Card: This is non-negotiable! Your dash cam needs a memory card to record anything. Rexing typically recommends a Class 10/UHS-1 or higher Micro SD card, and for the V1P Flex X4, it can handle up to a whopping 512GB. Don’t skimp here. a cheap, low-quality card can lead to recording issues and data loss.
• Cleaning Supplies: A clean windshield is key for the adhesive to stick properly. Grab some rubbing alcohol and a microfiber cloth.
• Plastic Trim Removal Tool Optional, but highly recommended: These are inexpensive and make tucking cables behind trim panels much easier and safer, preventing damage to your car’s interior.
• Zip Ties or Adhesive Cable Clips Optional: For extra cable management, especially if you want a super tidy look.
• Circuit Tester / Multimeter For Hardwiring: If you’re going the hardwire route, this tool is essential for identifying the correct fuses.

Step-by-Step: Standard Power Installation Cigarette Lighter

This is the most common and easiest way to get your Rexing V1P Flex X4 powered up. It’s basically plug-and-play.

Grab 50% OFF on RexingUSA.com

1. Preparing Your Windshield and Mounting the Front Camera

Picking the right spot for your front camera is crucial. You want it to capture a clear view of the road without obstructing your own vision. Most folks put it right behind their rearview mirror.

• Clean the Area: Use rubbing alcohol and a microfiber cloth to thoroughly clean the section of your windshield where you plan to mount the camera. This removes any grime or residue that could weaken the adhesive.
• Apply the Electrostatic Sticker: This clear film goes directly onto the cleaned windshield first. It protects your glass from the adhesive and makes future removal much easier. Smooth out any air bubbles.
• Attach the Mount to the Sticker: Peel the backing off the 3M adhesive on the mount and firmly press it onto the electrostatic sticker. Make sure the mount is oriented correctly, usually with the camera slot facing downwards or towards the dash.
• Wait it Out: This is an important step often overlooked! Rexing recommends waiting at least 20 minutes some guides suggest up to an hour after applying the mount before attaching the camera. This allows the adhesive to properly bond to the glass, preventing your camera from falling off later.
• Mount the Camera: Once the waiting game is over, slide your Rexing V1P Flex X4 main unit onto the mount until it clicks securely into place.

Grab 50% OFF on RexingUSA.com

2. Inserting and Formatting the Micro SD Card

You won’t record anything without this step!

• Power Down: First, make sure your dash cam is not powered on. Gently push your Micro SD card into the slot on the camera until it clicks.
• Initial Power On: Connect the power cable to the camera and then plug the other end into your car’s 12V accessory socket. The camera should power on automatically.
• Format the Card: To ensure your card works perfectly with your Rexing V1P Flex X4 and to avoid recording errors, you must format it directly in the camera.
  • If it’s recording, press the UP button or REC on some models to stop it.
  • Press the MENU button twice to enter the System Setup Menu.
  • Use the UP and DOWN buttons to navigate to the “Format” setting.
  • Press the OK button to confirm the selection and again to confirm formatting.
  • Important: This will erase all data on the card, so back up anything important first!

Grab 50% OFF on RexingUSA.com

3. Connecting the Power Cable and Routing it Discreetly

Now for the cables! You want them out of sight, out of mind, and definitely not dangling in your driving view. Mastering Your Rexing V3C Dash Cam: Your Ultimate Guide to Installation, Features, and Troubleshooting

• Plug in the Power: Connect the Mini-USB end of the car charger cable to your dash cam and the larger end to your car’s 12V DC power outlet. The camera should power on and start recording.
• Route the Cable: This is where that trim tool comes in handy.
  • Start by tucking the power cable upwards from the camera into the headliner the fabric ceiling of your car.
  • Work your way across the top of the windshield to the passenger side A-pillar the front pillar between the windshield and the front side window. Gently pry open the A-pillar trim with your plastic tool and run the cable down behind it.
  • Continue running the cable down along the side of the dashboard, usually tucking it into the gap between the dash and the door frame.
  • Finally, route it to your 12V power outlet. You can often hide the excess cable behind the glove box or under the floor mat.
• Secure the Cable: Use any included cable clips or small adhesive clips to keep the cable firmly in place, especially around curves or loose sections. The goal is to make it almost invisible.

Expanding Your View: Installing the Rear & Optional Extra Cameras

The Rexing V1P Flex X4 can go beyond just front recording, offering rear and even left/right side camera options for truly comprehensive coverage.

Grab 50% OFF on RexingUSA.com

1. Connecting the Cameras

• Each additional camera rear, left, right will have its own cable. These usually plug into specific ports on the main front camera unit. Make sure to consult your V1P Flex X4 manual for the exact port locations. The rear camera typically uses a longer extension cable.

Grab 50% OFF on RexingUSA.com

2. Routing the Cables

Routing the cables for these extra cameras is similar to the main power cable, but you’ll be extending further.

• Rear Camera Cable:
  • Start by connecting the rear camera cable to the main unit.
  • Run the cable along the headliner, just like the front camera’s power cable, but continue it all the way to the back of the vehicle.
  • When you reach the C-pillar the rear pillar of the passenger compartment or the side panels, gently tuck the cable behind the trim, using your trim tool.
  • Route it towards your rear windshield.
• Left/Right Camera Cables If Applicable:
  • These smaller cameras usually mount on the side windows or specific internal spots. Route their cables discreetly along the headliner and down the A-pillars or B-pillars the pillar between the front and rear doors to the main unit.

Grab 50% OFF on RexingUSA.com Your Ultimate Guide to the Rexing V1P Flex X4 4K WiFi Dual Dash Cam

3. Mounting the Cameras

• Rear Camera: Choose a spot on your rear windshield that provides a clear view, typically in the upper center. Clean the area, apply the electrostatic sticker, then the adhesive mount, and let it bond before attaching the camera, just like you did for the front. If your rear camera has a feature to assist with parking by connecting to your reverse light, you might need an extra step of tapping into your car’s reverse light wiring. This is usually more advanced and might be best left to a professional if you’re not comfortable with car wiring.
• Left/Right Cameras: Mount these according to their design and your desired coverage, ensuring they don’t obstruct side views.

Next Level Power: Rexing Smart Hardwire Kit Installation

If you want your Rexing V1P Flex X4 to record even when your car is off for parking surveillance or simply prefer a completely hidden power solution, a hardwire kit is the way to go. The Rexing Smart Hardwire Kit sometimes called Intelligent Hardwire Kit is designed for this.

Why Hardwire?

• 24/7 Parking Monitor: This is the big one. A hardwire kit provides constant power, letting your dash cam use its parking mode features like G-sensor or motion detection to record incidents while your car is parked.
• Clean Installation: No cigarette lighter adapter occupying your socket or visible cables from the dash.
• Battery Protection: Rexing’s smart hardwire kits typically have a voltage cut-off to prevent your car battery from draining completely.

What You’ll Need:

• Rexing Smart Hardwire Kit
• Circuit tester / Multimeter
• Fuse tap adapters often included, but ensure they match your car’s fuse type
• Pliers, wire strippers sometimes needed
• Socket wrench for grounding bolt

Grab 50% OFF on RexingUSA.com

1. Locating Your Car’s Fuse Box

• Your car’s fuse box is usually located in one of a few places: under the dashboard driver or passenger side, in the glove compartment, or under the hood. Consult your car’s owner’s manual to find its exact location.

Grab 50% OFF on RexingUSA.com Mastering Your Rexing V5C: A Smooth Firmware Update Guide

2. Identifying Fuse Types Constant & Accessory

The Rexing Smart Hardwire Kit usually has three wires:

• Red ACC/Switched: This wire needs to connect to a fuse that only has power when your car’s ignition is on an accessory fuse. Good candidates are fuses for the radio, cigarette lighter, or wipers.

• Yellow B+/Constant: This wire needs to connect to a fuse that is always powered, even when the car is off a constant fuse. Fuses for the hazard lights, door locks, or interior lights are often good choices.

• Black Ground: This connects to any unpainted metal bolt on your car’s chassis.

• Using a Circuit Tester: With your car off, use a circuit tester to test fuses in your fuse box. Level Up Your Drive: The Ultimate Guide to Rexing CarPlay Updates

  • To find a constant fuse yellow wire: Connect your tester’s ground clamp to a metal point. Touch the probe to the metal contact points on each fuse. Any fuse that lights up the tester with the car off is a constant power source.
  • To find an accessory fuse red wire: Turn your car’s ignition to the ACC position or fully on. Repeat the testing process. Any fuse that lights up with the ignition on but not when off is an accessory power source.

• Choose Wisely: Avoid critical safety fuses like those for airbags, ABS, or engine control. Look for non-critical ones, or even empty fuse slots if available.

Grab 50% OFF on RexingUSA.com

3. Connecting the Hardwire Kit

• Fuse Taps: Use the appropriate fuse tap adapters for your car’s fuse type.
  • Remove the original fuse from the chosen slot.
  • Insert the original fuse into the bottom slot of the fuse tap.
  • Insert a new fuse usually 3A, supplied with the hardwire kit into the top slot of the fuse tap for the dash cam’s circuit.
  • Crimp or securely connect the red wire from the hardwire kit to the accessory fuse tap, and the yellow wire to the constant fuse tap.
  • Plug the fuse taps into their respective fuse slots in your car’s fuse box, ensuring the correct orientation the outer prong of the tap should align with the powered side of the fuse slot.
• Grounding: Find a nearby metal bolt on the car’s chassis, loosen it, slip the black ground wire’s ring terminal underneath, and tighten the bolt securely. Make sure it’s bare metal, not painted, for a good connection.
• Connect to Dash Cam: Route the hardwire kit’s main power cable from the fuse box, discreetly tucking it behind panels, up the A-pillar, and along the headliner to your Rexing V1P Flex X4, plugging it into the camera’s Mini-USB port.

Critical Note for Rexing Smart/Intelligent Hardwire Kits:
If you’re using a Rexing Smart Hardwire Kit, do NOT enable the “Parking Monitor” function in your dash cam’s settings. The intelligent hardwire kit has its own built-in motion sensing and voltage protection that overrides the camera’s internal parking monitor. Enabling both might cause conflicts or malfunctions. The smart hardwire kit will automatically power up the dash cam to record when it detects motion or impact while the vehicle is off.

Smart Features & First Use: Connecting with the Rexing Connect App

Once your Rexing V1P Flex X4 is physically installed and powered, you’ll want to tap into its smart features, especially the Wi-Fi connectivity.

Grab 50% OFF on RexingUSA.com Rexing r4 user manual

1. Connecting to the Rexing Connect App

• Download the App: Grab the “Rexing Connect” app from your phone’s App Store iOS or Google Play Store Android.
• Activate Wi-Fi on Dash Cam: With your dash cam powered on and recording stopped, you can usually enable the Wi-Fi function by holding the UP button or REC button on some models for a few seconds. You should see a Wi-Fi icon appear on the camera screen, along with an SSID network name and password PWA2.
• Connect Your Phone: Go to your phone’s Wi-Fi settings, find the Rexing dash cam’s network SSID, and connect using the password displayed on the camera screen.
• Open the Rexing Connect App: Once connected, open the app, and you should see an option to connect to the dash cam. This will give you a live view, access to recorded files, and allow you to adjust settings easily from your phone.

Grab 50% OFF on RexingUSA.com

2. Basic Settings to Configure

Through the app or directly on the camera, set these up:

• Date and Time: Essential for accurate timestamps on your recordings. If your unit has GPS optional, it might set this automatically.
• Video Resolution: The V1P Flex X4 often has 4K for the front. You can adjust this, but higher resolution means larger files.
• Loop Recording: Ensure this is enabled. Dash cams record in short segments e.g., 1, 3, or 5 minutes and overwrite the oldest files when the SD card is full. This is standard operation.
• G-Sensor Sensitivity: This detects impacts and automatically locks the current recording to prevent it from being overwritten. You can usually set it to Low, Medium, or High. Too high, and it might lock files for every bump. too low, and it might miss a real incident.
• Parking Monitor if NOT using Smart Hardwire Kit: If you’re using the standard cigarette lighter power and want parking mode, enable this in the camera’s settings. However, as mentioned, if you have the Rexing Smart Hardwire Kit, leave this off in the camera.
• Audio Recording: You can usually toggle this on or off depending on your preference.

Pro Tips for a Clean & Safe Setup

Getting your dash cam installed isn’t just about functionality. it’s about making it look integrated and ensuring it’s safe.

• Cable Management is King: This is the difference between a professional-looking install and a mess of wires.
  • Trim Tools: Seriously, get a set of plastic trim tools. They’re cheap and will save your car’s interior from scratches when tucking wires.
  • OEM Cable Routes: Often, your car already has channels for factory wiring e.g., under door sills, behind the A-pillar. Running your dash cam cables alongside these can give you the cleanest look.
  • Weather Strips: Gently pull back the rubber weather stripping around your doors or windshield and tuck the cables inside. It might bulge slightly, but it won’t cause damage.
  • Avoid Airbags: When routing cables near pillars especially the A-pillar, be extremely careful not to impede the path of any airbags. Check your car’s manual for airbag locations. If you’re unsure, run the cable behind the airbag, securing it with clips or tape, ensuring it won’t interfere if the airbag deploys.
• Optimal Camera Placement:
  • Unobstructed View: Make sure the camera lens has a clear view of the road, not blocked by wipers, tint strips, or other objects.
  • Driver’s Vision: Position the camera where it doesn’t distract you or obstruct your line of sight. Behind the rearview mirror is usually ideal.
• SD Card Maintenance: Even high-endurance cards can get worn out from continuous overwriting. It’s a good practice to format your Micro SD card in the camera once a month to keep it healthy and prevent data corruption. Always back up important footage first!
• Regular Checks: Periodically check your dash cam to ensure it’s still recording properly, especially after long trips or temperature changes.

Troubleshooting Common Installation Hurdles

Sometimes things don’t go exactly as planned, and that’s totally normal. Here are some quick fixes for common issues you might run into:

• Dash Cam Won’t Power On:
  • Check Power Connection: Is the cigarette lighter adapter fully seated? Is the fuse in the hardwire kit or your car’s fuse box blown?
  • Car’s Power Outlet: Test your car’s 12V outlet with another device to make sure it’s working.
  • Hardwire Kit Wires: Double-check your constant, accessory, and ground connections in the fuse box. A multimeter can help confirm power to the hardwire kit leads.
• Camera Powers On, But Doesn’t Record:
  • SD Card: Is the Micro SD card inserted correctly? Is it a Class 10/UHS-1 or higher? Did you format it in the camera? Try re-formatting or using a different, known-good card.
  • Memory Card Full: While loop recording should prevent this, a corrupted card or settings issue could stop recording. Format the card.
• Rear Camera Not Detected / No Signal:
  • Cable Connection: Is the rear camera cable securely plugged into both the front unit and the rear camera itself? Check for any kinks or damage along the cable run.
  • Camera Unit: Unplug and re-plug the rear camera to ensure a proper connection.
• Wi-Fi Connection Issues:
  • Dash Cam Wi-Fi On: Make sure the Wi-Fi feature is activated on your Rexing V1P Flex X4.
  • App Permissions: Ensure the Rexing Connect app has the necessary permissions on your phone e.g., local network access.
  • Distance: Try connecting when your phone is close to the dash cam.
  • Forget Network: Sometimes “forgetting” the dash cam’s Wi-Fi network on your phone and reconnecting helps.
• Parking Monitor Not Working with Hardwire Kit:
  • Check Kit Installation: Re-verify constant and ground connections of the hardwire kit.
  • Camera Setting: Crucially, ensure the “Parking Monitor” setting is DISABLED in your dash cam’s menu if you are using a Rexing Smart/Intelligent Hardwire Kit. The kit handles this function, and enabling it on the camera can cause issues.
  • Motion Sensor: Ensure the hardwire kit’s motion sensor if applicable isn’t blocked.

If you’ve tried these troubleshooting steps and are still stuck, don’t hesitate to reach out to Rexing’s customer support. They’re usually very helpful, and sometimes a quick call or email can sort things out. Decoding Your RexingUSA Warranty: A Simple Guide

Grab 50% OFF on RexingUSA.com

Frequently Asked Questions

What kind of SD card does the Rexing V1P Flex X4 use?

Your Rexing V1P Flex X4 needs a Micro SD memory card that is Class 10/UHS-1 or higher, and it supports capacities up to an impressive 512GB for plenty of recording time. Make sure it’s a high-endurance card designed for continuous recording to prevent issues.

Do I have to format the Micro SD card in the Rexing V1P Flex X4?

Yes, absolutely! It’s super important to format your Micro SD card directly in the camera before you start using it, and regularly thereafter once a month is a good habit. This ensures the card is properly configured for the dash cam’s file system, which helps prevent recording errors and extends the life of your card. Just remember to back up any important videos first, as formatting erases everything!

Can I install the Rexing V1P Flex X4 myself, or do I need a professional?

For the standard plug-and-play installation using the cigarette lighter, most people can totally do it themselves! It’s mostly about careful mounting and tidy cable routing. However, if you’re looking to install the Rexing Smart Hardwire Kit for parking mode, that involves working with your car’s fuse box. If you’re not comfortable with basic automotive electrical work, it’s probably best to have a professional install the hardwire kit to avoid any potential damage to your vehicle or the dash cam.

How do I hide the wires for a cleaner look?

You’ve got a few great options for hiding those cables! You can typically tuck them into the headliner the ceiling fabric, then along the A-pillar the trim between your windshield and side door, and down to your power source. A plastic trim removal tool is a real game-changer here, helping you gently pry open panels without damaging anything. You can also run wires under weather strips or secure them with adhesive clips for a super neat finish. Just be extra careful around airbags when routing cables. Unlocking Incredible Savings: Your Ultimate Guide to Rexing USA Coupon Codes!

Does the Rexing V1P Flex X4 have a parking mode?

Yes, the Rexing V1P Flex X4 does have a parking monitor feature, but how it works depends on your power setup. If you want it to protect your car 24/7, even when the engine is off, you’ll need to install the Rexing Smart Hardwire Kit sold separately. An important tip: if you use the Smart Hardwire Kit, make sure to disable the “Parking Monitor” setting in the dash cam’s menu, as the hardwire kit handles that function itself, and enabling both can cause issues.

What’s the “electrostatic sticker” for, and do I really need it?

The electrostatic sticker is a clear film that goes on your windshield before you apply the dash cam’s adhesive mount. You really should use it! It acts as a protective layer, allowing the adhesive to stick to the sticker rather than directly to your glass. This makes it much easier to remove the dash cam mount in the future without leaving sticky residue or potentially damaging window tint.

0.0 0.0 out of 5 stars (based on 0 reviews) Excellent0% Very good0% Average0% Poor0% Terrible0% There are no reviews yet. Be the first one to write one. Your review Your overall rating Select a Rating5 Stars4 Stars3 Stars2 Stars1 Star Title of your review Your review Your name Your email This review is based on my own experience and is my genuine opinion. ​ Submit Review

Amazon.com: Check Amazon for Getting Started: What’s Latest Discussions & Reviews: