Struggling to get your Rexing dash cam to record that crucial footage? You’re not alone! Getting your dash cam set up and recording reliably is key to protecting yourself on the road. It can seem a bit technical, but trust me, once you understand the basics, you’ll be driving with confidence knowing your device has your back. Rexing dash cams are designed to offer a hands-off recording experience, automatically capturing your drives, but a proper setup is essential for this to work perfectly.
In this guide, we’re going to walk through everything you need to know about recording with your Rexing dash cam. We’ll cover everything from the initial setup and understanding those important recording modes to troubleshooting common hiccups. My goal is to make sure you get the most out of your Rexing, ensuring it captures every important moment on the road, day or night. Let’s get that camera working for you!
Setting Up Your Rexing Dash Cam for Recording
Before your Rexing dash cam can start recording, you need to get it properly installed and prepped. Think of it like getting ready for a road trip – you wouldn’t just jump in the car, right? There are a few essential steps to ensure smooth operation.
Choosing the Right SD Card
This is probably one of the most critical steps, and it’s where many people run into issues. Your dash cam is constantly writing and rewriting data, so it needs a robust memory card. Rexing dash cams typically support MicroSD cards, often up to 128GB, though some newer models can handle up to 512GB.
Here’s what you absolutely need to remember:
- Class 10 or Higher: Always go for a UHS-I / Class 10 or higher speed rating. This ensures the card can keep up with the continuous writing demands of high-definition video.
- Endurance Cards: Standard MicroSD cards meant for phones or cameras aren’t built for the constant overwriting of a dash cam. They’ll wear out pretty quickly, sometimes in just a few days or months. Look for “high endurance” MicroSD cards. brands like Kingston Canvas Go! Plus are often recommended by Rexing because they’re designed for this kind of heavy use.
- Avoid Specific Brands/Models: Interestingly, some users and Rexing itself recommend avoiding certain cards like SanDisk Ultra, as they’ve been known to cause reliability issues.
If you’re using an endurance card, you can expect it to last longer, potentially up to a year or more, even with daily use.
Installing and Formatting the SD Card
Once you’ve got the right card, it’s time to put it in. Why a Dash Cam Is More Than Just a Gadget
- Power Down: Always make sure your dash cam is completely turned off before inserting or removing the MicroSD card. Pulling it out while recording can corrupt the card or damage your device.
- Insert: Gently push the MicroSD card into the designated slot until it clicks into place. If it doesn’t click, try using a coin to push it in further until it locks.
- Format Crucial Step!: This is often overlooked but super important. You must format the memory card inside the dash cam. This ensures the card is properly configured for your specific Rexing device and helps prevent recording errors.
- To do this, power on your dash cam.
- If it’s recording, press the REC/OK button to stop it.
- Press the MENU button sometimes twice to enter the Setup Menu.
- Navigate using the UP/DOWN or REC/MIC buttons to find the “Format” option.
- Press OK to confirm. You’ll usually get a warning that all data will be deleted – confirm again.
- Rexing recommends formatting your SD card at least once a month, or after transferring important files, to keep things running smoothly.
Powering Up Your Dash Cam
Rexing dash cams are designed to automatically turn on and start recording when they receive power, usually from your car’s accessory power outlet cigarette lighter or a hardwired connection.
- Connect the Charger: Use the Rexing-approved car charger that came with your device. Plug one end into your car’s 12V DC outlet and the other often a mini-USB into the dash cam. Using incompatible chargers can cause serious damage or injury.
- Auto Start: When you start your car, the dash cam should power on automatically and begin recording. If your car’s cigarette lighter provides constant power even when the car is off, your dash cam might not turn on/off with the vehicle ignition, which can drain your car battery if not hardwired properly. The internal battery is usually small, meant for emergency shutdowns, not continuous operation.
- Manual Start If needed: If it doesn’t auto-start, you might need to press and hold the POWER button for a few seconds until the welcome screen appears.
Getting Your Rexing Dash Cam to Record The Nitty-Gritty
Most of the time, once your Rexing dash cam is powered on, it will automatically start recording in its default loop recording mode. But there are a few other ways it can capture footage.
Automatic Recording Loop Recording Explained
This is the bread and butter of dash cams! Loop recording means your dash cam continuously records video in short segments – typically 1, 3, 5, or 10 minutes long. When your MicroSD card fills up, the dash cam automatically overwrites the oldest, unlocked video files with new footage. This ensures that your dash cam never stops recording because of a full memory card.
- Why segments? Having shorter clips makes it easier to find specific incidents. Imagine sifting through one giant file versus several smaller, time-stamped ones!
- Settings: You can usually adjust the loop recording duration in your dash cam’s video settings menu. Some people prefer shorter segments for easier review, others prefer longer ones to reduce the number of files.
Manual Recording Event Recording
While loop recording handles most of your drives, sometimes you might want to manually save a specific moment. Many Rexing dash cams have an “OK” or similar button that, when pressed during active recording, will lock the current video file. This means that specific clip won’t be overwritten by loop recording, giving you a chance to save it later. Mastering Your Rexing M2: The Ultimate Dash Cam Manual & Setup Guide
Parking Monitor Recording
This feature is a lifesaver for when you’re away from your vehicle. When enabled and your car is turned off, the parking monitor or parking mode uses the dash cam’s G-sensor to detect impacts or motion around your parked vehicle.
- How it works: If an event like a bump or hit is detected, the dash cam will automatically wake up and record a short video clip often around 20 seconds. This clip is then typically locked to prevent it from being overwritten.
- Hardwiring: To use parking monitor features effectively, your dash cam needs a constant power supply, even when the car is off. This usually requires a special hardwire kit sold separately that connects directly to your car’s fuse box. Without it, the camera’s small internal battery won’t sustain parking mode for long.
- Settings: You can usually enable and configure parking monitor sensitivity in the video menu. Some models offer time-lapse parking mode, which compresses many hours of footage into a short video.
G-Sensor and Emergency Recording
The G-sensor Gravity Sensor is a built-in accelerometer that detects sudden movements or impacts, like a collision or hard braking.
- Automatic Protection: When the G-sensor is triggered, it automatically locks the current video segment, moving it to a separate “emergency” or “locked” folder on your SD card. These files are protected from being overwritten by loop recording.
- Sensitivity: You can adjust the G-sensor’s sensitivity in the settings usually low, medium, or high. If it’s set too high, everyday bumps or closing your car door might trigger it, filling your card with unnecessary locked files. A medium setting is often a good starting point, but you might need to experiment to find what works best for your vehicle. Remember, if you get too many locked files, you’ll need to format your SD card, so it’s good to keep an eye on it.
Understanding Recording Modes and Settings
Beyond just hitting “record,” your Rexing dash cam offers several settings to optimize your footage. Getting these right can make a huge difference in the quality and usefulness of your recordings.
Resolution and Frame Rate
These settings determine the clarity and smoothness of your video. Rexing V5 Dash Cam: Your Ultimate Guide to Setup and Usage
- Resolution: Rexing dash cams often offer various resolutions like 1080p Full HD, 1440p, or even 4K. Higher resolutions capture more detail, which is great for license plates or road signs, but they also take up more space on your SD card. For example, a 32GB card might hold about 5 hours of 1080p footage or 8 hours of 720p.
- Frame Rate FPS: This dictates how many images per second are captured. 30fps frames per second is common and usually sufficient for smooth video. Some cameras offer 60fps for even smoother motion, which can be useful for capturing fast-moving objects, but again, uses more storage.
You can usually find these options in the “Video Settings” menu after stopping any active recording.
Loop Recording Settings
As we touched on, you can set the duration of each video segment for loop recording. Typical options include 1, 3, 5, or 10 minutes. Choosing a longer duration like 3 minutes means fewer individual files to sort through, which can be convenient.
Audio Recording On/Off
Most Rexing dash cams come with a built-in microphone that records audio inside your vehicle.
- Importance: Audio can be crucial evidence in certain situations, providing context to incidents, like conversations with law enforcement.
- Control: This feature is usually enabled by default, but you can toggle it on or off. Often, there’s a dedicated “MIC” button or it can be found in the video settings menu. You might see a microphone icon on the screen, sometimes with a red line through it if it’s off.
- Privacy: Always be mindful of local laws regarding audio recording in vehicles, as consent and privacy regulations can vary.
Date and Time Stamp
This is a pretty standard feature, but important for evidence. Your dash cam will usually stamp the date and time directly onto your video footage. Ensure your dash cam’s date and time are set correctly, especially if it has GPS, as this will automatically synchronize the time. Some models also allow you to add your license plate number to the video, which can be helpful for identification.
Grab 50% OFF on RexingUSA.com Mastering Your Rexing Dash Cam App: A Complete Guide
How to Know if Your Rexing Dash Cam is Recording
It’s completely normal to wonder if your dash cam is actually doing its job. Rexing dash cams provide clear indicators to let you know they’re actively recording.
Visual Indicators LEDs, Screen Icons
- Red Blinking Light: This is the most common and universal sign. When your Rexing dash cam is recording, you’ll typically see a red blinking light often an LED indicator or a red dot icon on the device itself or on the screen.
- Recording Timer: On the LCD screen, you’ll usually see a running timer that shows how long the current video segment has been recording. This timer will reset with each new loop recording segment.
- Screen Saver: Many dash cams have a screen saver feature that turns off the display after a set period e.g., 30 seconds, 1 minute, 2 minutes to prevent distraction while driving. Even if the screen is off, the blinking red light or recording timer if you briefly press a button to wake the screen will confirm it’s still recording.
Audio Cues
While less common for indicating recording, your dash cam might have an audible beep or confirmation sound when it starts recording or when you manually save a file. Make sure to listen for these if you’re not looking at the screen.
Managing Your Recordings: Playback and Deletion
Eventually, you’ll want to review your footage or free up space on your SD card. Rexing provides a few ways to manage your recordings.
Playing Back Videos on the Dash Cam
You can review your videos directly on the dash cam’s screen. The Rexing DT2 Dash Cam: Unpacking Its Features (and What About WiFi?)
- Stop Recording: First, press the REC/OK button to stop any active recording. You can’t access menus or playback while it’s recording.
- Enter Playback Mode: Press the MODE button sometimes twice to switch from recording mode to playback mode. You’ll often see a “Playback Mode” icon on the screen.
- Browse Videos: Use the UP/DOWN navigation buttons to scroll through your stored video files.
- Play/Pause: Press the OK button to start playing the selected video. Press OK again to pause. You might also be able to fast forward or rewind using the UP/DOWN buttons during playback.
- Exit Playback: Press the MODE button to stop playback and return to the browsing screen or exit playback mode completely.
Playing Back Videos on a Computer/Phone Using the App
For a better viewing experience, or to easily save and share files, you’ll want to get the videos off the dash cam.
-
Using an SD Card Adapter Computer: This is often the quickest and most reliable method.
- Safely power down your dash cam and remove the MicroSD card.
- Insert the MicroSD card into an SD card adapter, then plug it into your computer’s card reader or an external reader.
- Your computer should recognize the card as a removable drive. Videos are typically stored in a folder like
\CARDV\MOVIE. Locked videos are usually in\CARDV\MOVIE\RO. - You can use standard media players like QuickTime, VLC, or Windows Media Player to watch the footage. For GPS data, Rexing offers a specialized “GPS Player” software for Mac and Windows that lets you view speed and location information alongside your video.
-
Using the Rexing Connect App Wi-Fi: Many Rexing dash cams have Wi-Fi connectivity, allowing you to connect to your smartphone via the “Rexing Connect” app available on App Store and Google Play.
- On your dash cam, in Video Recording Mode, you might need to hold the UP button to enable Wi-Fi. The screen will display an SSID Wi-Fi name and a password.
- On your mobile device, go to your Wi-Fi settings and connect to the dash cam’s Wi-Fi network using the provided password.
- Open the Rexing Connect app. From there, you should be able to view a live preview, start/stop recording, and view/save your captures to your phone.
- Note: Some users have reported mixed experiences with the Rexing app, suggesting alternative apps like “Teimacam” for iPhone users, though connecting via the app can be slower than direct SD card transfer.
-
Using a USB Cable Computer: You can connect your dash cam directly to your computer using the provided USB cable. Select “Mass Storage” mode on the dash cam to access the card’s contents.
Deleting Recordings Manual Deletion, Formatting
- Deleting Individual Files On Dash Cam:
- Enter Playback Mode and browse to the video you want to delete.
- Press the MENU button to see options.
- Select “Delete” and then “Delete Current” or similar. Confirm your choice.
- Deleting All Files On Dash Cam:
- In Playback Mode, press MENU, select “Delete,” then “Delete All.”
- Confirm the action. This will erase all unlocked recordings.
- Formatting the SD Card: This is the most comprehensive way to clear space and ensure optimal performance. Just remember, it deletes everything on the card, including locked files, so back up anything important first! The process is the same as described in “Installing and Formatting the SD Card.”
Protecting Important Files Locking Videos
If something important happens, like an accident, you can usually press the OK button during recording to manually lock the current video segment. As mentioned earlier, the G-sensor will also automatically lock files upon impact. Locked videos are saved in a special folder e.g., \CARDV\MOVIE\RO and are not overwritten by loop recording. Rexing dash camera
Troubleshooting Common Recording Issues
Even with the best setup, dash cams can sometimes act up. Here are some common problems and what you can do about them.
Rexing Dash Cam Not Recording
This is a big one, and it’s super frustrating when you think you’re covered, but you’re not.
- Check Power: Make sure the dash cam is receiving continuous power. A loose connection or a faulty car charger can interrupt recording. The internal battery isn’t for long-term power.
- SD Card Issues: This is the most frequent culprit.
- Full Card: Even with loop recording, if there are too many locked files from G-sensor triggers or manual locks, the card can become full, preventing new recordings.
- Incompatible or Faulty Card: Using a non-Class 10 or a low-quality/fake SD card can lead to recording failures or freezing. Rexing recommends Class 10 or higher. Try replacing it with a reputable, high-endurance brand.
- Improper Formatting: If you didn’t format the card in the dash cam, it might not work correctly. Reformat it.
- Firmware: Outdated or corrupted firmware can cause various malfunctions, including recording issues. Check the Rexing website for the latest firmware updates for your specific model and follow their instructions carefully.
SD Card Errors
You might see messages like “SD Card Error” or the camera freezing.
- Reformat: Always try formatting the card in the dash cam first.
- Replace: If formatting doesn’t help, the card might be damaged or corrupted. Try a different, reputable MicroSD card.
Loop Recording Not Working
If your oldest files aren’t being overwritten, check these: Mastering Your Rexing Dash Cam Mount: A Full Guide to Installation and Replacement
- Is it Enabled?: Double-check your settings to ensure loop recording is actually turned on.
- Too Many Locked Files: If your G-sensor is too sensitive or you’ve manually locked a lot of videos, your card might be full of protected files that can’t be overwritten. Adjust G-sensor sensitivity or manually delete/format to clear space.
Dash Cam Stops Recording Randomly
This often points back to power or SD card problems.
- Power Fluctuation: Ensure a stable power connection. Faulty cables or an unstable car power outlet can cause interruptions.
- Overheating: While Rexing dash cams are generally designed for high temperatures, extreme heat can sometimes affect performance. If your dash cam feels excessively hot, it might be contributing to recording stops.
- Battery Depletion: If your dash cam has an internal battery that’s old or depleted, it might not maintain power reliably.
Intermittent Audio Recording
Some users have reported issues with audio cutting in and out.
- Power Cycle: Sometimes a quick power cycle turning the dash cam off and on can temporarily fix it.
- Firmware/SD Card: As with video issues, ensure firmware is updated and you’re using a reliable SD card, as these can sometimes impact audio recording stability.
Is Rexing a Good Dash Cam?
When you’re looking for a dash cam, you want something reliable, and Rexing has definitely made a name for itself in the market. Many users consider Rexing to be a good brand, offering a range of dash cams with solid features like loop recording, G-sensors, parking monitors, and good video quality. Their cameras, like the V1P Max and V3 Plus, often boast high-resolution recording up to 4K on some single-channel models and wide-angle lenses, ensuring comprehensive coverage.
They also focus on user-friendly aspects like automatic start/stop recording, and features like Wi-Fi connectivity with companion apps though app experiences can vary. The inclusion of features like enhanced night vision and built-in microphones with audio recording options further adds to their appeal for drivers looking for detailed and reliable in-car surveillance. While no device is without its occasional quirks, Rexing’s commitment to continuous recording and smart storage management makes them a popular choice for many. Master Your Drive: The Ultimate Guide to Your Rexing CPW-2 Wireless CarPlay Adapter
Frequently Asked Questions
How do I know if my Rexing dash cam is actually recording?
You’ll typically see a red blinking light either an LED indicator or a red dot icon on the dash cam’s screen or body when it’s actively recording. Many models also display a running time counter on the screen. If the screen saver activates, the light will still usually blink in the background to confirm recording.
What is loop recording on a Rexing dash cam and how does it work?
Loop recording is a feature that allows your dash cam to record continuously without ever running out of storage space. It works by dividing your video footage into short segments e.g., 1, 3, 5, or 10 minutes. When your MicroSD card becomes full, the dash cam automatically overwrites the oldest, unprotected video files with new recordings. This ensures you always have the most recent footage.
Does Rexing dash cam record audio?
Yes, most Rexing dash cam models, including popular ones like the V1P Max and V3 Plus, are equipped with built-in microphones and can record audio inside the vehicle. This feature is usually enabled by default, but you can typically toggle audio recording on or off through the dash cam’s settings menu or by pressing a dedicated “MIC” button.
How do I delete recordings from my Rexing dash cam?
You can delete recordings in a couple of ways. To delete specific videos, enter Playback Mode, navigate to the desired video, press the MENU button, and select “Delete Current.” To delete all recordings except locked files, you can select “Delete All” in the Playback Menu. The most effective way to clear the card entirely and optimize performance is to format the SD card through the dash cam’s Setup Menu, but remember this erases everything, so back up important files first. Rexing customer support
Why is my Rexing dash cam not recording?
This is a common issue often related to the MicroSD card or power supply. First, ensure the dash cam is receiving constant power and the cable is secure. Next, check your MicroSD card: make sure it’s a Class 10 or higher endurance card, that it’s been formatted inside the dash cam, and that it’s not full of too many locked files that prevent new recordings. Outdated firmware can also cause recording failures, so check for updates.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for How to Get Latest Discussions & Reviews: |
Leave a Reply