You’ve just picked up a Rexing dash cam, and now you’re probably wondering, “How do I actually get this thing securely mounted in my car?” Well, to mount your Rexing dash cam effectively, you’ll want to prioritize placement that doesn’t obstruct your view while ensuring a clear field of vision for the camera. It’s not just about sticking it on. it’s about making sure it stays put, captures what you need, and keeps you safe on the road. A properly mounted dash cam can be a real game-changer, providing peace of mind and crucial evidence if something unexpected happens. In fact, the global dashboard camera market was valued at around USD 4.40 billion in 2024 and is predicted to grow to about USD 10.75 billion by 2034, showing just how many people are embracing this tech for road safety. So, let’s get you set up right!
Getting your Rexing dash cam securely in place is more than just sticking it to the windshield. it’s about optimizing your view, ensuring stable footage, and making sure it doesn’t distract you while driving. Whether you’re dealing with a Rexing dash cam mount replacement or installing a brand-new unit like the Rexing V3 dash cam mount or Rexing V1 dash cam mount, there’s a right way to do it. We’ll walk you through everything from choosing the best spot to handling different mount types and troubleshooting common issues.
Finding the Sweet Spot: Where to Mount Your Rexing Dash Cam
Let’s be real, the last thing you want is your dash cam blocking your view or falling off mid-drive. So, where’s the best place for your Rexing dash cam?
Most experts agree that the ideal spot for a front dash cam is high on your windshield, right behind your rearview mirror, and as centered as possible. This positioning is like hitting three birds with one stone:
- Unobstructed View: It keeps the camera out of your direct line of sight, minimizing distractions and helping you stay focused on the road.
- Maximized Coverage: Being centered means it can capture a wide, even field of view, covering both sides of your vehicle effectively.
- Discreetness: Tucked behind the mirror, your dash cam is less noticeable from both inside and outside the car, which can deter potential theft.
When you’re aiming the lens, try to tilt it slightly upwards so your footage captures about 60% road and 40% sky. This little trick helps with exposure and clarity, making sure you can clearly see important details like road signs and license plates.
A quick heads-up on rear cameras: If you have a two-channel system, the rear camera generally goes in the uppermost center of the rear windshield. Just be careful not to place it over those defroster grid lines.
What About the Dashboard?
While the windshield is usually preferred, some states have specific laws about where you can mount objects on your windshield. For instance, in some places, windshield mounting might be prohibited, making the dashboard your next best option. If you go for dashboard mounting, just make sure the camera isn’t blocking your view, and it’s still within the range of your windshield wipers for clear footage. Master Your Drive: The Ultimate Guide to Your Rexing CPW-2 Wireless CarPlay Adapter
Car Sensors and Your Dash Cam
Got advanced driver assistance systems ADAS like Subaru Eyesight or Toyota Safety Sense? Don’t worry, your Rexing dash cam typically won’t interfere with those sensors. They’re usually mounted flush against the windshield and point outwards, so your dash cam should be fine. If you’re ever concerned, you can just shift its position slightly.
Types of Rexing Dash Cam Mounts: A Closer Look
Rexing offers a few different ways to get your camera secured, each with its own pros and cons. Knowing these can really help you choose the best Rexing dash cam mount for your setup.
Rexing Dash Cam Windshield Mounts: Adhesive vs. Suction Cup
Most Rexing dash cams, including popular models like the V1, V3, and V1P, come with options for either an adhesive mount or a suction cup mount.
1. Adhesive Mount 3M Adhesive
These are super popular for a good reason: they offer a more permanent and stable setup and are generally more resistant to vibrations and temperature changes. If you want a “set it and forget it” kind of mount, adhesive is usually the way to go. Rexing often includes 3M adhesive mounts, which are known for their strong grip. Rexing customer support
How to Install an Adhesive Mount:
- Clean, Clean, Clean: This is probably the most crucial step. Use a good window cleaner or rubbing alcohol to thoroughly clean the spot on your windshield where the mount will go. Make sure it’s completely dry and at room temperature—not too hot, not too cold.
- Electrostatic Film Optional, but Recommended: Some Rexing dash cams, like the V1P MAX, might include an electrostatic film. This film goes on the windshield first and acts as a buffer, making it easier to remove the adhesive later without leaving residue on your glass.
- Apply Adhesive to Mount if separate: If the adhesive pad isn’t already on the mount, stick it on, making sure it’s neat and covers the designated area.
- Position and Press: Carefully peel off the protective film from the adhesive. Position the mount exactly where you want it – remember, once it’s stuck, it’s pretty hard to reposition! Press it firmly against the windshield for about 30 seconds.
- Let it Set: This is key! Allow the adhesive to set for at least 20 minutes, and ideally several hours or even overnight, before attaching your dash cam to it. This gives the adhesive time to create a super strong bond.
2. Suction Cup Mount
Suction cup mounts are fantastic if you need flexibility. They’re easy to install, remove, and reposition, making them great if you want to move your dash cam between different vehicles or just experiment with placement.
How to Install a Suction Cup Mount:
- Clean the Surface: Just like with adhesive, a clean, dry windshield is vital for a strong suction.
- Position and Press: Ensure the locking lever on the suction cup is in the “up” position. Press the suction cup firmly against the windshield.
- Lock it In: Rotate the lever downwards to lock the suction cup securely in place.
- Check Stability: Give it a gentle tug to make sure it’s stable before attaching your Rexing dash cam.
A little tip: Suction can weaken over time, especially with temperature changes. It’s a good idea to reattach your suction cup mount occasionally to keep it secure.
Rexing Dash Cam Mirror Mount Kit
If you prefer a super clean look or want to avoid anything on your windshield, a Rexing dash cam mirror mount kit might be for you. These usually attach directly to your existing rearview mirror, often with straps, transforming it into a smart mirror with an integrated dash cam. Rexing Companies Reviews: Are These Dash Cams the Right Fit for Your Ride?
Installation is typically straightforward and often tool-free:
- Strap It On: You’ll usually secure the mirror dash cam over your existing rearview mirror using silicone straps or bands. Make sure it’s snug and secure.
- Adjust the Camera: Many mirror dash cams have an adjustable lens that can be moved left, right, up, or down to get the best view.
- Route Wires: Just like with other dash cams, you’ll need to route the power and rear camera if applicable wires discreetly.
Rexing models like the M2 and M3 are popular mirror dash cam options.
Rexing Motorcycle Dash Cam Mount
Yes, Rexing also has options for two-wheelers! The Rexing motorcycle dash cam mount for models like the MTC1 typically uses 3M adhesive pads for the front and rear cameras.
Key considerations for motorcycle mounts:
- Cleanliness: Ensure the surface is free of water, oil, or dust before applying the 3M adhesive pad.
- Lens Adjustment: Motorcycle cameras often allow for vertical lens adjustment up to 270 degrees since mounting points can vary greatly. You might even stick them upside down and adjust the recording angle.
- Professional Help: Due to the variety of motorcycle models and the importance of secure mounting, Rexing recommends consulting a local professional for installation if you’re unsure.
Grab 50% OFF on RexingUSA.com Sticking Power: Your Ultimate Guide to the Rexing CPDuo 686 Suction Cup Mount
Rexing Dash Cam Mount Replacement & Troubleshooting
Things happen! Maybe your mount lost its stick, or you cracked it. Replacing your Rexing dash cam mount is a common need. Rexing offers replacement mounts for various models, including Rexing V3 dash cam mount, Rexing V1 dash cam mount, and others.
How to Remove an Old Adhesive Mount
Removing an old, stubborn adhesive mount can feel tricky, but it’s totally doable without damaging your windshield.
- Heat it Up: This is your secret weapon! Use a hairdryer or a heat gun on a low setting, carefully! from the outside of the glass. Heat the adhesive for about 30 seconds to a minute. This softens the glue, making it much easier to remove.
- Pry it Off: Once it’s warm, you can usually start to pry it off. Use a plastic trim tool, an old credit card, or even some dental floss to slowly “saw” through the adhesive between the mount and the windshield. Avoid using anything that might scratch the glass, like metal razor blades, unless you’re extremely careful and know what you’re doing.
- Clean the Residue: There might be some sticky residue left behind. For this, you can use:
- Rubbing alcohol isopropyl alcohol: It works wonders on adhesive residue.
- Glass cleaner: Can help with the remaining bits.
- Goo Gone: A popular product specifically designed to remove sticky residues. If using Goo Gone, make sure to thoroughly clean the glass with alcohol and water afterwards before applying a new mount.
- Fingers: Sometimes, you can “roll” the adhesive residue into small balls with your fingers and pick them off.
Replacing Your Rexing Dash Cam Mounting Bracket
Once the old mount is off and the area is clean, replacing it is pretty much the same as installing a new one. Just make sure you get the correct Rexing dash cam mounting bracket for your specific model. Rexing USA’s website or retailers like Best Buy often have replacement adhesive and suction cup mounts for various models.
Common Mounting Issues and Quick Fixes
- Dash Cam Falling Off: This is almost always due to improper surface preparation or not letting the adhesive cure long enough. Always clean the windshield thoroughly with alcohol and let the adhesive set for at least 20 minutes, ideally longer. For suction cups, regularly re-moisten the suction cup or clean the surface again.
- Wobbly Footage: A wobbly mount means shaky footage. Ensure the mount is firmly attached and that the camera is securely clicked into the mount. Some mounts have adjustment knobs – tighten those down!
- Obstructed View: If your camera is blocking your view, move it! The area behind the rearview mirror is usually the safest bet. Also, check local regulations.
Optimal Cable Routing: The Clean Look
A truly professional dash cam installation isn’t just about the mount. it’s about hiding those cables. No one wants wires dangling all over the place. Understanding the REX Prefix in x86-64 Assembly: Your Ultimate Guide
Here’s how to hide and route your Rexing dash cam’s power cables:
- Start from the Dash Cam: Plug the power cable into your Rexing dash cam.
- Tuck into the Headliner: Carefully push the cable into the gap between the headliner the fabric ceiling of your car and the windshield. Most cars have a small space there. You can use a trim tool often included with Rexing dash cams or even your fingers.
- Down the A-Pillar: Guide the cable down the A-pillar the pillar between your windshield and the front side window. You can gently pull back the weather strip the rubber seal around the door frame and tuck the cable inside. This conceals the wire almost entirely.
- Along the Dashboard/Kick Plate: Continue routing the cable along the side of the dashboard, perhaps behind the kick plate the panel near your feet.
- To the Power Source: Finally, run the cable to your car’s power outlet cigarette lighter or where you’ve hardwired it.
This neat routing not only looks better but also prevents wires from interfering with your driving.
The Rexing Advantage: Why Good Mounting Matters
Rexing dash cams are known for their quality, from the crisp recording of models like the V1 and V3 to the advanced features of mirror cams like the M3. But even the best dash cam is only as good as its mounting. A secure mount ensures:
- Clear, Stable Footage: No shaky, blurry videos when you need them most.
- Optimal Field of View: You capture everything important, from the road ahead to potential incidents.
- Compliance with Laws: Many regions have rules about where dash cams can be placed to avoid obstructing the driver’s vision.
- Longevity of Your Device: A securely mounted camera is less likely to get damaged from falls or excessive vibration.
So, take your time with the installation. It’s worth it for the peace of mind and the reliable recording your Rexing dash cam provides! Unlocking Wireless Freedom: Your Rexing CarPlay Journey Explained (and What Reddit Really Thinks)
Frequently Asked Questions
How do I install my Rexing V3 dash cam mount?
To install your Rexing V3 dash cam mount, first, clean the windshield thoroughly where you want to place it, preferably behind the rearview mirror. Attach the 3M adhesive pad to the mount, then firmly press the mount onto the clean, dry windshield. It’s crucial to wait at least 20 minutes, or ideally several hours, for the adhesive to set completely before attaching your V3 dash cam to the mount. This ensures a strong, lasting bond.
Can I use a Rexing dash cam mirror mount kit with any car?
Most Rexing dash cam mirror mount kits are designed to strap over your existing rearview mirror, making them widely compatible with many car models. However, it’s always a good idea to check the product’s specifications for any particular mirror shapes or sizes that might not fit, especially if your mirror has a unique design or integrated features. Some require a cylindrical-shaped stem with at least 0.4 inches of clearance behind the mirror.
What’s the best way to remove sticky residue from my windshield after taking off a Rexing dash cam mount?
The best way to remove sticky residue is by first heating the adhesive from the outside of the windshield with a hairdryer or heat gun on low for 30 seconds to a minute. Then, you can gently scrape off the softened adhesive with a plastic trim tool or an old credit card. For any remaining residue, use rubbing alcohol, glass cleaner, or a product like Goo Gone, making sure to clean the glass thoroughly afterward.
Do Rexing dash cams come with different mounting options?
Yes, most Rexing dash cams, like the V1, V3, and V1P series, typically offer both adhesive 3M and suction cup mounting options. Adhesive mounts provide a more permanent and stable solution, while suction cup mounts offer flexibility for easy removal and repositioning. Rexing also has specialized mirror mount kits and adhesive mounts for motorcycle dash cams. Rexing CarPlay Adapter Review: Your Ticket to a Wire-Free Drive?
Where should I route the power cable for my Rexing dash cam for a clean look?
For a clean installation, start by plugging the power cable into your Rexing dash cam. Then, carefully tuck the cable into the gap between your car’s headliner and the windshield. Continue guiding it down the A-pillar the front side pillar by gently pulling back the weather strip and concealing the wire inside. Finally, route the cable along the dashboard or under the kick plate to your power source. This hides the wires, making your setup look much tidier.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Mastering Your Rexing Latest Discussions & Reviews: |
Leave a Reply