If you’re looking to get your Rexing V5 dash cam up and running smoothly, you’ve landed in the right spot. Understanding the Rexing V5 dash cam manual might seem a bit daunting, but it’s really just a roadmap to unlocking all the cool features this device offers. It’s like getting a new gadget. you want to make sure you’re using it to its full potential, right?
The Rexing V5 is a pretty solid piece of tech, rocking 4K Ultra HD recording at 3840×2160@30fps, which means super clear footage. It’s got a Sony IMX335 sensor for awesome low-light performance, a 170-degree ultra-wide-angle lens to catch everything on the road, and even built-in GPS and Wi-Fi so you can easily manage your recordings. Plus, it’s modular, meaning you can add extra cameras for the cabin or rear view, which is pretty neat for full coverage. This guide will walk you through everything, from unboxing to advanced settings, so you can feel confident that your drives are always recorded, giving you peace of mind on the road.
Getting a new dash cam, especially one as capable as the Rexing V5, is exciting! But sometimes, the manual can feel a bit like reading a technical textbook. Don’t worry, I’ve been there. This guide is all about breaking down the “Rexing V5 dash cam manual” into simple, easy-to-follow steps. We’ll cover everything you need to know to get your V5 installed, set up, and working perfectly, so you can hit the road with confidence.
Unboxing Your Rexing V5: What’s in the Box?
First things first, let’s see what you’ve got! When you crack open the box for your Rexing V5, here’s what you should typically find inside:
- The Rexing V5 Dashboard Camera itself.
- A Car Power Connector usually a 12ft cable, which is super handy for routing.
- A 3M Adhesive Mount for sticking it securely to your windshield.
- A USB Cable for connecting to your computer.
- The User Manual and a Safety Guide.
- A Cable Management Tool – seriously, this little thing is a lifesaver for neat installation!
Some bundles might also include a MicroSD card often 32GB and additional cameras like a cabin cam or a rear cam, if you opted for those extras. Just double-check everything against the list in your manual to make sure you have it all.
Getting Started: Initial Setup Steps
you’ve got everything out of the box. Now, let’s get this thing ready to record!
1. Inserting the Memory Card
This is a critical first step. The Rexing V5 uses Micro SD memory cards up to 256GB, and Rexing recommends Class 10/UHS-1 or higher for optimal performance. Some users even suggest specific brands like Kingston Canvas Go or Canvas React, or SanDisk High Endurance cards, while advising against SanDisk Ultra cards, which can sometimes cause issues. Mastering Your Rexing Dash Cam App: A Complete Guide
Before inserting or removing a memory card, always make sure the camera is powered down. Gently push the memory card into the slot until you hear a click. To remove it, push it in again until it clicks, and the spring release will push it out. If you’re having trouble, sometimes a coin can help give it that final push until it locks in.
2. Powering On and Formatting the SD Card
Once your memory card is in, connect the car charger to your vehicle’s 12V DC power outlet cigarette lighter and then to the camera. The V5 is designed to automatically power on and start recording once it receives a charge, usually when you start your vehicle.
Now, for a super important step: formatting the memory card within the camera itself. This prepares the card for proper recording and helps prevent errors.
Here’s how to do it:
- Power on the camera. If it’s already recording, press the OK button to stop the recording.
- Press the MENU button twice to get into the System Settings menu.
- Use the Up/Down navigation buttons to scroll to the “Format” setting.
- Press the OK button to confirm your selection.
Always remember to back up any important data on the card before formatting, because this will wipe everything off it! The Rexing DT2 Dash Cam: Unpacking Its Features (and What About WiFi?)
Mounting Your Rexing V5: Placement is Key
Where you put your dash cam matters for both optimal recording and legal compliance. You want a clear view of the road without obstructing your own driving vision.
1. Choosing the Right Spot
The ideal spot is usually behind your rearview mirror, in the center of your windshield near the top. This keeps it out of your direct line of sight while still getting a great view. Be mindful of any sensors or advanced driver-assistance systems in your car that might be around the rearview mirror. you don’t want to block those.
2. Using the Adhesive Mount
The Rexing V5 typically comes with a 3M adhesive mount. Here’s how to attach it:
- Clean the area on your windshield where you plan to mount the camera. Make sure it’s free of dust or grease for the best adhesion.
- Place the 3M tape on the mount. Make sure the mount is oriented correctly – the T-interlock needs to be facing the right way for the camera to slide on.
- Firmly press the mount onto the windshield. Rexing recommends waiting at least 20 minutes some suggest longer, even up to 24 hours if possible before actually attaching the camera to the mount. This gives the adhesive time to cure properly.
- When you’re ready, slide the camera onto the mount. If you have modular cameras like a rear or cabin cam, they might just clip right into the side of the main unit.
Pro Tip: Some users note that the V5 mount doesn’t have rotation adjustment, so ensure you get the mount perfectly straight when applying it. The camera lens itself does offer some vertical and horizontal adjustment, which is helpful. Also, leave yourself a little space about three-quarters of an inch above the mount area, as the camera clips in from slightly above. Rexing dash camera
3. Cable Management
Nobody likes a messy car with cables dangling everywhere. This is where that cable management tool comes in handy!
- Route the power cable around the windscreen and tuck it neatly under the trim.
- Use the provided cable clips to secure any loose sections.
- Most cars have enough space in the headliner and A-pillars to hide the cable discreetly, leading it down to your 12V power outlet. If you have a rear camera, you’ll need to route its cable from the front unit to the back of your car, often along the headliner and down the C-pillar.
Powering Up: Connecting Your Rexing V5
As we touched on, the V5 automatically powers on when connected to a 12V accessory socket or cigarette lighter and your vehicle starts. The included 12V car power cable is designed for this.
The V5 relies on being continuously connected to a power source for recording during your drives. It uses a super-capacitor instead of a traditional battery, which is a great feature. Super-capacitors are more durable and can withstand extreme temperatures from -20°F to 176°F or -28°C to 80°C, making them more reliable in harsh climates than standard lithium-ion batteries. The internal “battery” is really just for emergency shutdowns and saving the last file, not for extended recording when unplugged.
Grab 50% OFF on RexingUSA.com Mastering Your Rexing Dash Cam Mount: A Full Guide to Installation and Replacement
Diving into Settings: Optimizing Your Rexing V5
Now that your V5 is installed and powered up, let’s tweak those settings to get the best performance. To access the settings, if the camera is recording, press the OK button to stop it. Then, press the MENU button once for video settings or twice for system settings.
Here are some key settings you’ll want to adjust:
Video Settings
- Video Resolution: The V5 boasts 4K 3840×2160@30fps. This is usually your best bet for the clearest footage. You might have options for lower resolutions, but 4K gives you the most detail, which is crucial for things like reading license plates.
- Loop Recording: This is how dash cams manage storage. Your V5 will record videos in 1, 2, or 3-minute intervals. Once your memory card is full, the camera automatically overwrites the oldest unlocked recordings. Make sure this is turned on. otherwise, your card will fill up, and it’ll stop recording.
- Exposure: This setting can help brighten or darken your video, especially useful in very bright or dim conditions.
- Audio Recording: The V5 has a built-in microphone. You can choose to record audio or turn it off. Remember, laws about recording audio in a vehicle vary, so be mindful of local regulations more on that later!.
- Date/Time Stamp: Definitely enable this. Having accurate date and time on your footage is essential for any evidence.
- WDR Wide Dynamic Range: This feature helps the camera handle scenes with both very bright and very dark areas, ensuring better exposure across the frame.
System Settings
- G-Sensor/Gravity Sensor: This is a crucial safety feature. The G-Sensor detects sudden impacts or collisions like in an accident and automatically locks the current video segment, preventing it from being overwritten by loop recording. You can usually adjust the sensitivity Low/Medium/High. Many users find the “Medium” setting works well to avoid locking files from every little bump in the road.
- Parking Monitor: This feature allows your dash cam to provide 24/7 surveillance, even when your car is parked and turned off. When the V5 detects vibration, it will automatically turn on and record a 20-second video. To activate this feature, you’ll need to hardwire your Rexing V5 using a smart hardwire kit, which is often sold separately.
- GPS Logger: The V5 has built-in GPS that accurately records your driving location and speed. You can view this data overlaid on Google Maps using the Rexing GPS Player software on your computer. Make sure the GPS speed unit is set to your preference km/h or mph. Once a signal is found, the screen icon will change from red to green.
- Wi-Fi Connect & Mobile App: The V5 has built-in Wi-Fi. Download the “Rexing Connect” app from your phone’s app store iOS or Android. To connect, hold down the OK button on the camera to access Wi-Fi mode. Then, open your phone’s Wi-Fi settings, find the camera’s SSID it’ll look something like “REXING_XXXX”, and connect using the default password “12345678”. Once connected, open the Rexing Connect app to view a live preview, start/stop recording, and download or manage your captured videos directly on your phone.
- Voice Control: The V5 supports voice commands, letting you do things like “lock video,” “take a photo,” “start video,” or “turn on/off audio” hands-free.
- Screen Saver: You can set the screen to turn off after a set time e.g., 15 sec, 1 min, 3 min or stay off, which can be less distracting while driving.
The Hardwire Hookup: For Constant Power & Parking Monitoring
If you want to use the Parking Monitor feature and have your dash cam record even when your car is off, you’ll need a hardwire kit. This connects your dash cam directly to your car’s fuse box, providing constant power.
Why Hardwire? Master Your Drive: The Ultimate Guide to Your Rexing CPW-2 Wireless CarPlay Adapter
- 24/7 Parking Surveillance: As mentioned, this is the main reason. The camera can monitor for impacts or motion when your car is parked.
- Clean Installation: No cables dangling from your cigarette lighter.
- Battery Protection: Smart hardwire kits usually have a voltage cutoff, meaning they’ll stop drawing power from your car battery if it gets too low, preventing it from draining completely.
What You’ll Need:
- A Rexing Smart Hardwire Kit specific for your V5.
- Fuse taps often included in the kit, but check.
- A circuit tester or multimeter to identify fuse types.
- Pliers or a fuse puller.
- Some basic automotive knowledge or a handy friend!
Basic Steps for Hardwiring General Principles – always refer to your specific kit’s instructions and vehicle’s fuse box diagram:
- Locate your car’s fuse box. This is typically under the dashboard, in the glove compartment, or under the hood.
- Identify suitable fuses: You’ll usually need to find two types of fuses:
- Constant Power BATT: This fuse is always “hot” and provides power even when the ignition is off. It’s for the Parking Monitor.
- Accessory/Ignition Switched ACC: This fuse only gets power when your car’s ignition is on. This tells the dash cam when your car is running.
- Use a circuit tester or multimeter to test fuses while the car is off and on to confirm their function.
- Connect the hardwire kit:
- The yellow wire usually for constant power goes into a fuse tap connected to your chosen constant power fuse.
- The red wire usually for accessory power goes into a fuse tap connected to your chosen ignition-switched fuse.
- The black wire is your ground wire. Find a metal bolt or screw on the car’s chassis unpainted metal and securely attach the ground wire to it.
- Route the hardwire cable to your dash cam, tucking it neatly under the trim, similar to how you routed the standard power cable.
- Plug the hardwire kit’s power connector into your V5.
Important Considerations:
- If you’re unsure, it’s always best to have a professional install the hardwire kit. Messing with your car’s electrical system incorrectly can lead to problems.
- Rexing often has video tutorials for hardwire kit installation on their support website or YouTube channel.
Understanding Dash Cam Rules: What You Need to Know
Using a dash cam is legal in most places, but there are important rules regarding their placement and what you can record. These laws can vary significantly depending on where you are – whether it’s the UK, Australia, Germany, or specific states in the US. Rexing customer support
1. Mounting Requirements
The biggest rule is generally that your dash cam must not obstruct the driver’s view of the road.
- Most states in the US allow mounting behind the rearview mirror or in the upper center of the windshield.
- Some states have specific restrictions, like Pennsylvania, where it’s illegal to mount on the windshield or windows, requiring dashboard mounting instead. In Indiana, it must be in the bottom passenger corner and no larger than four square inches.
- It’s also often prohibited to mount devices where airbags deploy.
Always check your local and state/country regulations!
2. Audio Recording Laws
This is where it gets a bit tricky, especially concerning privacy.
- Many places operate under “one-party consent” laws, meaning you as the driver/one party can record conversations as long as you’re aware of it.
- However, some states in the US like California and Florida and certain countries require “all-party consent,” meaning everyone being recorded must agree to it.
- If you’re in an all-party consent area and record audio without informing passengers, that footage might not be admissible as evidence, and you could face legal issues.
- The safest bet is often to disable audio recording or clearly inform all passengers that audio is being recorded.
3. Footage Admissibility
Generally, dash cam footage recorded legally is admissible as evidence in court or for insurance claims. However, footage obtained illegally e.g., violating privacy laws might be deemed inadmissible. Remember, footage can be used both for and against you.
Since laws are always changing and vary so much, it’s wise to do a quick search for “dash cam laws ” to stay updated. Rexing Companies Reviews: Are These Dash Cams the Right Fit for Your Ride?
Maintenance Tips for Your Rexing V5
Keeping your Rexing V5 in top shape ensures it’s always ready when you need it.
- Regular SD Card Formatting: I can’t stress this enough! Format your memory card at least once a month directly in the camera. This helps prevent data corruption, ensures smooth loop recording, and prolongs the card’s life.
- Keep Lenses Clean: Use a soft, lint-free cloth to gently clean the camera lens. Avoid abrasive materials that could scratch it. Clear lenses mean clear footage!
- Firmware Updates: Rexing occasionally releases firmware updates that can improve performance, fix bugs, or add new features. Check the RexingUSA support website periodically for the latest firmware for your V5. Follow their instructions carefully when updating firmware. using incorrect versions can cause problems.
- Check Connections: Periodically ensure all cables power, rear cam, etc. are securely plugged in and free from damage.
Troubleshooting Common Issues
Even the best tech can sometimes act up. Here are some common problems and what you can do:
- Camera Not Powering On: First, check if the power cable is securely connected to both the dash cam and your vehicle’s 12V outlet. If you’re hardwired, check the fuses in your fuse box. Sometimes a voltage drop during vehicle startup can cause this, especially with push-button start cars. Try powering it on manually by holding the power button.
- Recording Issues Stops Recording, SD Card Error: This is often a memory card problem.
- Format the SD card in the camera.
- Ensure loop recording is turned on.
- Try a different, high-quality, high-speed Class 10/UHS-1 or higher Micro SD card from a recommended brand.
- Make sure the SD card isn’t full of locked files check your G-Sensor sensitivity.
- Camera Freezes or Reboots Randomly: This could be a few things:
- A depleted internal super-capacitor unlikely if continuously powered.
- A faulty power source or cable.
- Corrupted firmware or an SD card issue. Try formatting the SD card and checking for firmware updates.
- Wi-Fi Connectivity Problems:
- Ensure the Rexing Connect app is updated.
- Restart both your dash cam and your phone.
- Double-check the Wi-Fi password default is 12345678.
- GPS Not Working:
- Ensure the GPS module if external, though V5 has built-in has a clear view of the sky.
- Allow a few minutes for the GPS signal to acquire. The icon on the screen should turn green once connected.
For more detailed troubleshooting, always check the Rexing support website or contact their customer service. They’re there to help! Sticking Power: Your Ultimate Guide to the Rexing CPDuo 686 Suction Cup Mount
Frequently Asked Questions
How do I format the SD card on my Rexing V5?
To format the SD card, first ensure the camera is powered on and stop any recording by pressing the OK button. Then, press the MENU button twice to enter the System Settings menu. Use the navigation buttons to scroll to the “Format” option, and press OK to confirm. Remember, this deletes all data, so back up anything important first!
Does the Rexing V5 have a parking monitor? How does it work?
Yes, the Rexing V5 features a parking monitor. When activated, the dash cam will automatically turn on and record a 20-second video if it detects any vibration while your car is parked and turned off. To enable this 24/7 surveillance, you’ll need to install a Rexing Smart Hardwire Kit, which connects the dash cam directly to your car’s fuse box for constant power.
Can I view videos from my Rexing V5 on my phone?
Absolutely! The Rexing V5 has built-in Wi-Fi. You can download the “Rexing Connect” app available on App Store and Google Play. Connect your phone to the dash cam’s Wi-Fi network the SSID and default password “12345678” can be found by enabling Wi-Fi on the camera, then open the app. From there, you can view a live stream, start/stop recording, and download videos directly to your mobile device.
What kind of SD card should I use for my Rexing V5?
The Rexing V5 supports Micro SD memory cards up to 256GB. It’s crucial to use a high-quality card that is Class 10/UHS-1 or higher. Rexing recommends specific brands like Kingston Canvas Go or Canvas React, or SanDisk High Endurance cards, and advises against using SanDisk Ultra cards, which can sometimes lead to recording issues. Understanding the REX Prefix in x86-64 Assembly: Your Ultimate Guide
Why is my Rexing V5 saying “SD card error”?
An “SD card error” usually points to an issue with your memory card. Common causes include:
- The card needs to be formatted in the camera.
- The card is full check your loop recording settings and G-Sensor sensitivity.
- The card is corrupted or faulty.
- The card is not compatible or not a high enough speed rating.
Try formatting the card, ensuring loop recording is on, or replacing the card with a new, recommended high-speed Micro SD card.
How do I reset my Rexing V5 to factory settings?
If you’re encountering persistent issues, a factory reset can sometimes help. You’ll typically find this option within the camera’s System Settings menu, similar to where you find the format option. Power on the camera, stop recording, press the MENU button twice to enter System Settings, and look for a “Factory Reset” or “Default Settings” option. Confirm your selection, but be aware this will revert all settings to their defaults.
Is it legal to use a dash cam everywhere?
Dash cams are legal in most places, but the specific laws vary by region e.g., country, state, or even city. The main considerations are mounting placement it must not obstruct the driver’s view and audio recording consent. Many places have “one-party consent” for audio, while others require “all-party consent.” Always research the specific dash cam laws in your area to ensure compliance and avoid potential legal issues.
Unlocking Wireless Freedom: Your Rexing CarPlay Journey Explained (and What Reddit Really Thinks)|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Rexing V5 Dash Latest Discussions & Reviews: |
Leave a Reply